Noise Characteristics of Current Collector for High-Speed Railway Using Delta-Shaped Collector Head.
نویسندگان
چکیده
منابع مشابه
Internal-short-mitigating current collector for lithium-ion battery
Thermal runaway is mitigated by changing the geometry of current
متن کاملA LATERALLY ETCHED COLLECTOR InP/InGaAs(P) DHBT PROCESS FOR HIGH SPEED POWER APPLICATIONS
Abstract We present a selective laterally wet etched collector InP/InGaAs/InGaAsP double heterojunction bipolar transistor (DHBT) with a quaternary step graded base collector structure. This device shows a DC current gain of = 70 over a large collector current range, a breakdown voltage of BVCE0 = 10.5 V, and a maximal collector emitter voltage of more than 5.5 V at 105 A/cm2 collector current ...
متن کاملMobile Collector for Field Trips
Current e-Learning is based on learning management systems that provide certain standard services course authoring and delivery, tutoring, administration and collaboration facilities. Rapid development of mobile technologies opens a new area of m-Learning to enhance the current educational opportunities. Field trips are a relevant part of the curriculum, but for various reasons it is often diff...
متن کاملMussel-inspired Polydopamine-treated Copper Foil as a Current Collector for High-performance Silicon Anodes
A new Cu current collector was prepared by introducing a mussel-inspired polydopamine coating onto a Cu foil surface to improve the electrochemical performance of a Si electrode. The polydopamine coating covalently bonded the polymeric binder (with hydroxyl functional groups) via a condensation reaction. The coating improved the adhesion strength between the Si composite electrode and the Cu cu...
متن کاملRf Recovery Using Cara and Depressed Collector*
A system is being tested for recovery of rf power by conversion to DC pulsed power. The system consists of a cyclotron autoresonance accelerator (CARA) [1,2], and a single stage depressed collector (Fig. 1). A 50 kV, 5 A electron beam is injected into CARA, and up to 1 MW of S-band rf power is absorbed by the beam with efficiency exceeding 95%. The beam then passes to a single stage depressed c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series C
سال: 1998
ISSN: 1344-7653,1347-538X
DOI: 10.1299/jsmec.41.338