Noise and Vibration Propagation Mechanism in Long Steel Ropes Using Two-Vibration Measuring Techniques.
نویسندگان
چکیده
منابع مشابه
Active Vibration Rejection in Steel
This contribution is concerned with vibration rejection by nonlinear control techniques in steel industry, particularly in rolling mill plants. The high quality requirements of rolled products, especially in relation to the thickness tolerances, mean a challenging task also from a control point of view. The key part of this contribution deals with so-called wrapper rolls as well as chatter vibr...
متن کاملA Novel Ropes-Driven Wideband Piezoelectric Vibration Energy Harvester
This paper presents a novel piezoelectric vibration energy harvester (PVEH) in which a high-frequency generating beam (HFGB) is driven by an array of low-frequency driving beams (LFDBs) using ropes. Two mechanisms based on frequency upconversion and multimodal harvesting work together to broaden the frequency bandwidth of the proposed vibration energy harvester (VEH). The experimental results s...
متن کاملVibration Damping of High-Chromium Ferromagnetic Steel
The aim of the present work is to study the effect of annealing on the vibration damping capacity of high-chromium (16%) ferromagnetic steel. The alloys were prepared from raw materials of 99.9% purity melted in a high frequency induction furnace under high vacuum. The samples were heat-treated in vacuum at various temperatures (800 to 1200oC) for 1 hour followed by slow cooling (120oC/h). The ...
متن کاملInvestigation of Fan Fault Problems Using Vibration and Noise Analysis
Cooling fans are used to solve the thermal problems of most critical electronic parts in systems. Therefore, it is very important to monitor the fans condition periodically dealing with the detection, location and analysis of the possible faults. The fault diagnosis of rotating systems is increasingly paying attention. The main purpose of this study is to investigate the possible faults in a ro...
متن کاملGearbox Noise and Vibration Prediction and Control
This paper will review practical techniques and procedures employed to quiet gearboxes and transmission units. The author prefers solving the gear noise problem at the very source to introduce an enclosure as a means to reduce radiated noise, which seems to be easy but its effect on the sound pressure level is small. The gearbox noise problem solution is focused on the improvement of gear desig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1996
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.62.1811