Nitrogen Injection in Molten Aluminum in a Tank Degasser
نویسندگان
چکیده
منابع مشابه
High-pressure Injection Injury with Molten Aluminum
INTRODUCTION A previously healthy 65-year-old male presented to the emergency department complaining of a burn to his right forearm. Just prior to arrival the patient was working at a tool and die company casting products with molten aluminum where he inadvertently caused his injury. Physical examination revealed a burn to the right forearm of varying degrees of severity. A non-painful charred ...
متن کاملFLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be con...
متن کاملEFFECT OF A CHLORIDE FLUX ON THE DISSOLUTION OF Mn-Al COMPACTS IN MOLTEN ALUMINUM
Abstract: Dissolution and recovery of Mn-Al compacts with and without a chloride flux was studied by taking samples from the melt after addition of the compact. Events occurring after the addition of the compacts into the melt were studied using water quenched specimens after holding them for a specified time in molten state. The cross sections of these specimens were characterized by SEM a...
متن کاملPrecipitation and Deposition of Aluminum Containing Species in Tank Wastes
Aluminum-containing phases represent the most prevalent solids that can appear or disappear during the processing of radioactive tank wastes. Processes such as sludge washing and leaching are designed to dissolve Al-containing phases and, thereby, minimize the volume of high-level waste glass required to encapsulate radioactive sludges. Unfortunately, waste-processing steps that include evapora...
متن کاملMolten Triazolium Chloride Systems as New Aluminum Battery Electrolytes
The possibility of using molten mixtures of 1,4-dimethyl-l,2,4-triazolium chloride (DMTC) and aluminum chloride (A1C13) as secondary battery electrolytes was studied, in some cases extended by the copresence of sodium chloride. DMTC-A1CI~ mixtures demonstrated high specific conductivity in a wide temperature range. The equimolar system is most conductive and has K values between 4.02 x 10 -~ an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: World Journal of Engineering and Technology
سال: 2018
ISSN: 2331-4222,2331-4249
DOI: 10.4236/wjet.2018.64044