Nitrogen as Alloying Element in Steels (16th Report). A Few Experiments on High Manganese Austenitic Steel Containing Nitrogen of Various Contents
نویسندگان
چکیده
منابع مشابه
Cytotoxicity study of plasma-sprayed hydroxyapatite coating on high nitrogen austenitic stainless steels.
Stainless steel has been frequently used for temporary implants but its use as permanent implants is restricted due to its low pitting corrosion resistance. Nitrogen additions to these steels improve both mechanical properties and corrosion resistance, particularly the pitting and crevice corrosion resistance. Many reports concerning allergic reactions caused by nickel led to the development of...
متن کاملOn the Constitutive Model of Nitrogen-Containing Austenitic Stainless Steel 316LN at Elevated Temperature
The nitrogen-containing austenitic stainless steel 316LN has been chosen as the material for nuclear main-pipe, which is one of the key parts in 3rd generation nuclear power plants. In this research, a constitutive model of nitrogen-containing austenitic stainless steel is developed. The true stress-true strain curves obtained from isothermal hot compression tests over a wide range of temperatu...
متن کاملinvestigating the effect of manganese content on the properties of high manganese austenitic steels
in this study, in order to investigate the effect of increasing the manganese content on microstructure and mechanical properties of high manganese austenitic steels, three alloys with successive increases in weight percentages of manganese (7.55, 13.1, and 16.5) and carbon (0.8 and 1.2) were cast in the presence of a constant amount of chromium (1.5 wt.%) and silica (0.6 wt.%). the samples exp...
متن کاملHeat treatment of high manganese type X57MnAl27-5 austenitic steel
In the paper, the influence of heat treatment parameters on microstructure and mechanical properties of high manganese type X57MnAl27-5 austenitic steel was investigated. The as-forged bar with diameter of 15 mm were underwent a saturation process at six different temperatures. The microstructural changes of austenite and the influence of heat treatment on the mechanical properties were conside...
متن کاملAn investigation on the passivation behavior of nitrogen enriched AISI 316L austenitic stainless steel
In the present work the effects of plasma nitridization on the passivation behavior of AISI 316L was investigated. To do this; nitriding treatments were carried out at 420°C for 1, 2, 4 and 16 hours. The phase composition and structure of the nitrided layer were studied by Low Angle X-ray diffraction and Scanning Electron Microscopy. The hardness of samples also was evaluated by Vickers microha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1954
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.18.9_529