Nitriding of High Cr-High Mn Austenitic Steel

HIGH TEMPERATURE TENSILE PROPERTIES OF NEW FE-CR-MN DEVELOPED STEEL

Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results ...

Numerical Simulation of High Temperature Corrosion Processes in Mn, Cr, Si, Al – Alloyed Steel Samples

The grain boundary oxidation mechanism in hot rolled steel samples during cooling from 500 °C – 800 °C down to room temperature was mathematically modeled. Given a fixed temperature ramp, the migration of the atomic species (iron, oxygen and the alloying elements) has been calculated with the parabolic rate equation for diffusion. After each small time step, the data was transferred into the da...

The Efficiency of Ion Nitriding of Austenitic

M. Ogórek, Z. Skuza, T. Frączek, Czestochowa University of Technology, Czestochowa, Poland The study examined layers were formed on the outer surface of austenitic stainless steel 304 under glow discharge conditions in the low-temperature and short-term ion nitriding. The outer layers analyzed in the work produced in parallel in the classical process of cathode and a novel method of “active scr...

Heat treatment of high manganese type X57MnAl27-5 austenitic steel

In the paper, the influence of heat treatment parameters on microstructure and mechanical properties of high manganese type X57MnAl27-5 austenitic steel was investigated. The as-forged bar with diameter of 15 mm were underwent a saturation process at six different temperatures. The microstructural changes of austenite and the influence of heat treatment on the mechanical properties were conside...

Mn-cr Systematics of Brachina Revisted in High Precision