Nitric Oxide Treatment for the Control of Reverse Osmosis Membrane Biofouling

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nitric oxide treatment for the control of reverse osmosis membrane biofouling.

Biofouling remains a key challenge for membrane-based water treatment systems. This study investigated the dispersal potential of the nitric oxide (NO) donor compound, PROLI NONOate, on single- and mixed-species biofilms formed by bacteria isolated from industrial membrane bioreactor and reverse osmosis (RO) membranes. The potential of PROLI NONOate to control RO membrane biofouling was also ex...

متن کامل

Effect of Organoclay on the Performance of Reverse Osmosis Membrane

This study investigated the effect of Cloisite15A (C15A) organoclay in the substrate layer on the performance of reverse osmosis (RO) membranes. The substrate of the RO membranes was modified using different loading of C15A (ranging from 0.3 - 0.7 wt%) within polysulfone (PSf) substrate and the polyamide (PA) selective layer was formed on the top. Effect of the modified substrate layer on the w...

متن کامل

The Effect of Osmotic Dehydration on Reverse Osmosis Membrane Performance

Akin type (asymmetric) reverse osmosis membranes undergo an irreversible osmotic dehydration upon coming into contact (skin side) with salt solutions. The extent of consequent changes (in appearance; decrease in linear dimension, water flux and salt rejection) are dependent on the salt concentration. These observations are correlated with the expected morphological changes taking place duri...

متن کامل

The application of nitric oxide to control biofouling of membrane bioreactors

A novel strategy to control membrane bioreactor (MBR) biofouling using the nitric oxide (NO) donor compound PROLI NONOate was examined. When the biofilm was pre-established on membranes at transmembrane pressure (TMP) of 88-90 kPa, backwashing of the membrane module with 80 μM PROLI NONOate for 45 min once daily for 37 days reduced the fouling resistance (Rf ) by 56%. Similarly, a daily, 1 h ex...

متن کامل

Characterization and effect of biofouling on polyamide reverse osmosis and nanofiltration membrane surfaces.

Biofouling is a major reason for flux decline in the performance of membrane-based water and wastewater treatment plants. Initial biochemical characterization of biofilm formation potential and biofouling on two commercially available membrane surfaces from FilmTec Corporation were investigated without filtration in laboratory rotating disc reactor systems. These surfaces were polyamide aromati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Applied and Environmental Microbiology

سال: 2015

ISSN: 0099-2240,1098-5336

DOI: 10.1128/aem.03404-14