Niobium addition improves the corrosion resistance of TiHfZrNbx high-entropy alloys in Hanks’ solution

Corrosion Resistance of Dental Alloys

Metals and metallic alloys are unavoidable materials in everyday dental use for the making of fillings, cast cores and post systems, individual crowns, implantants’ suprastructures, dentures and orthodontic devices. They still belong to the vital materials in dentistry. Applied alloys in a mouth are exposed to the influence of chemical, biological, mechanical, thermal and electrical forces whic...

High-Performance Alloys for Resistance to Aqueous Corrosion

Tarnish Resistance, Corrosion and Stress Corrosion Cracking of Gold Alloys

Tarnishing, corrosion and stress corrosion cracking (SeC) of gold alloys are related phenomena. They present problems when they occur in gold jewellery, dental gold alloys and electronic devices. They are exploited, however, in the depletion gilding and finishing of gold jewellery; and in the extraction, refining and fire assaying of gold. There is still much that is not known about these pheno...

Evaluation of the Effects of Nanoclay Addition on the Corrosion Resistance of Bituminous Coating

In this study, the corrosion resistance of a bituminous coating reinforced with different ratios of nanoclay pigment was studied. To make nanocomposite coatings, 2, 3, and 4 wt.% of clay (Cloisite Na+) were incorporated into water emulsified bitumen. The coatings were applied to steel 37. Optical microscopy and X-ray diffraction (XRD) were used to characterize the nanocomposite structure. In or...

Alloying and Processing Effects on the Aqueous Corrosion Behavior of High-Entropy Alloys

The effects of metallurgical factors on the aqueous corrosion behavior of highentropy alloys (HEAs) are reviewed in this article. Alloying (e.g., Al and Cu) and processing (e.g., heat treatments) effects on the aqueous corrosion behavior of HEAs, including passive film formation, galvanic corrosion, and pitting corrosion, are discussed in detail. Corrosion rates of HEAs are calculated using ele...