NiO / Sr doped Ce0.85Pr0.10 Er0.05O2-δ mesoarchitectured catalyst for partial oxidation of CH4 and anode fueled by H2

نویسندگان

چکیده

Our study focuses on an advanced exploratory research based the development of new IT-SOFCs anode compositions in conjunction with surfactants as template to obtain mesoarchitectured catalysts. We designed NiO/Sr doped Ce0.85Pr0.10 Er0.05O2-õ (2.5 and 5 mol.% Sr) mesoarchitectures robust crystalline framework following a hydrothermal synthesis route. NiO was deposited by wet impregnation calcined air at 900 °C, order assure good interaction between Ni mesoporous matrix. The obtained materials exhibit cubic CeO2 fluorite phase Pr2O3 SrCeO3 secondary traces these were assessed catalyst for partial oxidation CH4 over time under reducing atmosphere. electrochemical behavior fed H2 (2.5% vol. H2O) investigated NiO/CPS/YSZ/GDC/Pt cells. compositional effect structural properties, surface chemistry, catalytic performance highlighted. Sr incorporated lattice, proved X-ray Photoelectron Spectroscopy, guarantees excellent stability catalysts 20h, during high conversion CO selectivity (90% range 700–800 °C) well better anode.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Methane partial oxidation using FeO(x)@La(0.8)Sr(0.2)FeO(3-δ) core-shell catalyst--transient pulse studies.

The chemical looping reforming (CLR) process, which utilizes a transition metal oxide based redox catalyst to partially oxidize methane to syngas, represents a potentially efficient approach for methane valorization. The CLR process inherently avoids costly cryogenic air separation by replacing gaseous oxygen with regenerable ionic oxygen (O(2-)) from the catalyst lattice. Our recent studies sh...

متن کامل

Oxidation of greenhouse gases, CH4 and CO, over LaMnxNi1-xO3±δ mixed oxide

The performance of LaMnxNi1-xO3±δ perovskite mixed oxides (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1) which were prepared by different methods, the Pechini and sol-gel methods in the oxidation of greenhouse gases, CH4 and CO, has been investigated. All samples were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electr...

متن کامل

Transient studies of perovskite anode catalyst for a direct CH4 Solid Oxide Fuel Cell

Introduction: The direct use of CH4 as the feed to the solid oxide fuel cell (SOFC) will allow elimination of a reformer, simplifying the SOFC system and decreasing the system cost [1]. The overall reaction on the anode catalyst in the direct CH4 SOFC is the electrochemical oxidation of CH4: CH4 + 4O CO2 + 2H2O + 8e. Due to the nature of hydrocarbon reactions at high temperature and the reducin...

متن کامل

Synthesis of Cu Doped NiO Nanoparticles by Chemical Method

The Cu doped NiO (NiO:Cu) nanoparticles were synthesized by co-precipitation method using NiCl2.6H2O, CuCl2.2H2O for Ni and Cu sources, respectively. Sodium hydroxide has been used as a precipitator agent. Effect of Cu doping agent on the structural and optical properties of nanostructures were characterized by XRD, SEM, AFM, spectrophotometry, FTIR a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Microporous and Mesoporous Materials

سال: 2021

ISSN: ['1873-3093', '1387-1811']

DOI: https://doi.org/10.1016/j.micromeso.2021.111171