Ni–Mo 2 C supported on alumina as a substitute for Ni–Mo reduced catalysts supported on alumina material for dry reforming of methane

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structured Ni catalysts on porous anodic alumina membranes for methane dry reforming: NiAl2O4 formation and characterization.

This communication presents the successful design of a structured catalyst based on porous anodic alumina membranes for methane dry reforming. The catalyst with a strong Ni-NiAl2O4 interaction shows both excellent activity and stability.

متن کامل

An XPS study of CrOx on a thin alumina film and in alumina supported catalysts

We have investigated chromium layers evaporated onto a thin alumina film at room temperature. The oxidation and reduction behavior of this model catalyst was compared to atomic layer deposition (ALD) and impregnated alumina supported catalysts using X-ray photoelectron spectroscopy (XPS) with a detailed analysis method utilizing asymmetric peak shapes to represent both metallic and oxidic state...

متن کامل

CATALYTIC REFORMING OF n-HEPTANE ON PLATINUM-TUNGSTEN SUPPORTED ON GAMMA-ALUMINA

The mono-metallic and bi-metallic catalysts have been prepared by impregnating with solutions containing a compound of H2PtCl6,WO3 and 1ml HCl (0.1 mol). It should be noted that the catalysts’ activity and selectivity have been determined under these conditions : 450-5000C ,and 15-25atm by H2. For converting n-heptane , the molar ratio H2/C7H16 is 5 , and LHSV is 1.5ml/h. It has been proved tha...

متن کامل

CATALYTIC REFORMING OF n-HEPTANE ON PLATINUMNIOBIUM SUPPORTED ON GAMMA-ALUMINA

The series of mono-metallic and bi-metallic catalysts have been prepared by impregnatingwith solutions containing compound of H2PtC15,NbC15 and lml HC1 (0.1 mol). The activityand selectivity of the catalysts have been determined under conditions at 450-500°C, 15-30atm. Molar ratio H2/C7H16=5 and VVH=1.5/h for converting n-heptane. Under theseexperimental conditions it has been established that ...

متن کامل

Catalytic Reforming of n-Heptane on Platimum - Rhenium Supported on Gamma-Alumina

Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Comptes Rendus Chimie

سال: 2018

ISSN: 1631-0748

DOI: 10.1016/j.crci.2017.06.002