NiCu Alloy Nanoparticle-Loaded Carbon Nanofibers for Phenolic Biosensor Applications
نویسندگان
چکیده
منابع مشابه
NiCu Alloy Nanoparticle-Loaded Carbon Nanofibers for Phenolic Biosensor Applications
NiCu alloy nanoparticle-loaded carbon nanofibers (NiCuCNFs) were fabricated by a combination of electrospinning and carbonization methods. A series of characterizations, including SEM, TEM and XRD, were employed to study the NiCuCNFs. The as-prepared NiCuCNFs were then mixed with laccase (Lac) and Nafion to form a novel biosensor. NiCuCNFs successfully achieved the direct electron transfer of L...
متن کاملCarbon Nanofibers for Environmental Applications
Catalytically grown carbon nanofibers (CNF) are a newly developed type of material produced from the decomposition of selected carbon-containing gases over metal particles. These materials consist of nano-sized graphite platelets separated a distance of at least 0.335 nm and stacked in various orientations with respect to the fiber axis. Such an arrangement results in a unique structure that is...
متن کاملUltrasensitive Magnetic Nanoparticle Detector for Biosensor Applications
Ta/Ru/Co/Ru/Co/Cu/Co/Ni80Fe20/Ta spin-valve giant magnetoresistive (GMR) multilayers were deposited using UHV magnetron sputtering and optimized to achieve a 13% GMR ratio before patterning. The GMR multilayer was patterned into 12 sensor arrays using a combination of e-beam and optical lithographies. Arrays were constructed with 400 nm × 400 nm and 400 nm × 200 nm sensors for the detection of ...
متن کاملSurface Functional Poly(lactic Acid) Electrospun Nanofibers for Biosensor Applications
In this work, biotin surface functionalized hydrophilic non-water-soluble biocompatible poly(lactic acid) (PLA) nanofibers are created for their potential use as biosensors. Varying concentrations of biotin (up to 18 weight total percent (wt %)) were incorporated into PLA fibers together with poly(lactic acid)-block-poly(ethylene glycol) (PLA-b-PEG) block polymers. While biotin provided surface...
متن کاملSynthesis of Zataria Multiflora extraction loaded chitosan/PEO nanofibers via electrospinning method for potential biomedical applications
Background & Objective: The nanofibers are referred to as fibers with a diameter of less than 1000 nm. There are various ways to make nanofibers, one of which is electrospinning. In this method, nanofibers are formed on aluminum sheets. The conversion of chitosan to derivatives with greater solubility, its mixing with other polymers and the use of special solvents are methods for its ease of us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2015
ISSN: 1424-8220
DOI: 10.3390/s151129419