منابع مشابه
Hydroxyapatite coating on - - zlrconlausing glass coating technique
The aim of this study was to deyelop a noyel hydroxyapatite (HA) coating method on zirconia using glass coating technique. A borosi)icate glass, the mixture of the glass ttnd HA (3e, 50, 70, and 90 mass%), and the 100% HA were coated on two kinds of zirconia discs and fired at 900-950'C. After the final coating, the surface of the sample was etched for 3 min in an acid-mixture of 3% HF and 5%HN...
متن کاملImproved Plasticity of Ti-Based Bulk Metallic Glass at Room Temperature by Electroless Thin Nickel Coating
By restricting the dilated deformation, surface modification can stimulate multiple shear banding and improve the plasticity of bulk metallic glasses (BMGs). Aimed at modifying the surface of BMGs by thin layers, a crystalline Ni coating with ultrafine grains was coated on the surface of a Ti-based BMG by electroless plating. With a thickness of about 10 μm, the prepared thin coating could effe...
متن کاملFunctionalized glass coating for PDMS microfluidic devices
Microfluidic devices can perform multiple laboratory functions on a single, compact, and fully integrated chip. However, fabrication of microfluidic devices is difficult, and current methods, such as glass-etching or soft-lithography in PDMS, are either expensive or yield devices with poor chemical robustness. We introduce a simple method that combines the simple fabrication of PDMS with superi...
متن کاملTHE STUDY OF ELECTROLESS COATING OF NICKEL ON CARBON FIBERS
The continuity and thickness of the coating layer, are the most important factors in wetting properties and strength of carbon fibers. These factors are crucial in the quality of metal matrix composites made with carbon fibers. In this research the Polyacrylonitrail base carbon fibers have been nickel coated with 0.2, 0.5, 0.8 and 11 ,u in thickness, by the electroless method. The effect of the...
متن کاملQuantitative Analysis of Electroplated Nickel Coating on Hard Metal
Electroplated nickel coating on cemented carbide is a potential pretreatment technique for providing an interlayer prior to diamond deposition on the hard metal substrate. The electroplated nickel coating is expected to be of high quality, for example, indicated by having adequate thickness and uniformity. Electroplating parameters should be set accordingly for this purpose. In this study, the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1996
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.69.370