Ni-Based Coatings for Oil and Gas Industry Fabricated by Cold Gas Spraying
نویسندگان
چکیده
This paper presents the results of study nickel-based coatings fabricated by cold gas spraying. In this study, compositions based on Ni, Ni–Cu, Ni–Zn, and Ni–Al2O3/TiC applied to low-alloyed steel bases were investigated. The composition, type powder (mechanical mix or mechanically alloying), thickness varied choose optimal characteristics for recovery, repair procedures, specific applications in oil industry media. second phase was added Ni-based increase corrosion wear resistance. Pure nickel also studied as a benchmark. Corrosion resistance means electrochemical testing autoclave simulated oilfield conditions. Hydroabrasive using unique bench. Scanning electron microscopy mappings, microhardness testing, adhesion used correlate tests with structure, continuity, porosity coatings. It shown that applying mechanical alloying did not lead an effective hydroabrasive All coating specimens have sufficiently high adhesion. Ni–Zn has lowest Ni–Cu Al2O3/TiC additives give ambiguous properties. A 40–60 microns provides sufficient performance Thus, varying chemical composition allows obtaining qualities made spraying use industry.
منابع مشابه
Cloud-based Fault Detection and Classification for Oil & Gas Industry
Oil & Gas industry relies on automated, mission–critical equipment and complex systems built upon their interaction and cooperation. To assure continuous operation and avoid any supervision, architects embed Distributed Control Systems (DCS), a.k.a. Supervisory Control and Data Acquisition (SCADA) systems, on top of their equipment to generate data, monitor state and make critical online & offl...
متن کاملAn Integrated Human Resource Planning Framework for Project-based Organizations in Oil and Gas Industry
The complexities of the oil industry, combined project-based organizations’ complexities, have led the traditional planning of HR being failed. The success of these organizations is based on integrative human resource planning. To this end, the purpose of this study was to determine the factors and components of human resource planning in oil and gas project-based organizations and providing an...
متن کاملQuantitative risk management in gas injection project: a case study from Oman oil and gas industry
The purpose of this research was to study the recognition, application and quantification of the risks associated in managing projects. In this research, the management of risks in an oil and gas project is studied and implemented within a case company in Oman. In this study, at first, the qualitative data related to risks in the project were identified through field visits and extensive interv...
متن کاملIdentify blockchain technology strategies in the oil and gas industry
The purpose of the research is to identify blockchain technology strategies in the oil and gas industry. In this research, the mixed research method has been used. In the qualitative part of the research community, there were experts in the field of blockchain technology, 12 of whom were purposefully selected for in-depth interviews. Open and axial coding was used to analyze the data. The stati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials proceedings
سال: 2021
ISSN: ['2673-4605']
DOI: https://doi.org/10.3390/iec2m-09388