Ni-B Amorphous Alloy Film Deposited by Electroless Deposition Method
نویسندگان
چکیده
منابع مشابه
Ni-B Coating Production on Magnesium Alloy by Electroless Deposition
The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...
متن کاملRoughness Optimization of Electroless Ni-B Coatings Using Taguchi Method
In this paper, the authors present an experimental study of roughness characteristics of electroless Ni-B coatings and optimization of the coating process parameters based on L27 Taguchi orthogonal design. Three coating process parameters are considered viz. bath temperature, reducing agent concentration, and nickel source concentration. It is observed that concentration of reducing agent toget...
متن کاملCharacterization of nitrate particulate dry deposition by vacuum-deposited thin film reaction method
Air samples were collected at a highway intersection, coastal location and suburban area in Taichung, Taiwan for the characterization of nitrate containing particulates (NCPs) in dry deposition from October 2002 to February 2003. Sampling was accomplished with a surrogate surface technique in non-raining days. Collecting tapes were precoated with nitron (C20H16N4) in a vacuum evaporator control...
متن کاملAmorphous thin film growth: minimal deposition equation
A nonlinear stochastic growth equation is derived from (i) the symmetry principles relevant for the growth of vapor deposited amorphous films, (ii) no excess velocity, and (iii) a low-order expansion in the gradients of the surface profile. A growth instability in the equation is attributed to the deflection of the initially perpendicular incident particles due to attractive forces between the ...
متن کاملElectroless Deposition of Ni-Cu-P Alloy on 304 Stainless Steel by Using Thiourea and Gelatin as Additives and Investigation of Some Properties of Deposits
In this research a layer of Ni-Cu-P was deposited on 304 stainless steels by using gelatin and thiourea as additives in a sulfate solution. In order to determine the properties of deposited layers, a microhardness tester was used for microhardness measurement, X.R.D. for microstructural analysis, and a scanning electron microscope equipped with E.D.X. for determining morphology and analyzing th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1975
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.39.8_831