Ni-Al and NiO-Al Composite Coatings by Combustion-Assisted Flame Spraying
نویسندگان
چکیده
منابع مشابه
Electrodeposited Co – Ni – Al O composite coatings 2 3
Composite coatings of Co–Ni–Al O were studied by electrolytic codeposition of Co–Ni alloys and Al O from a sulfamate 2 3 2 3 electrolyte containing Al O particles. The influence of plating parameters on the content of the co-deposited Al O particles in 2 3 2 3 Co–Ni alloys was investigated. The maximum value of co-deposited Al O can be achieved at a particle content of 80 g l in y1 2 3 bath, a ...
متن کاملA Self-Propagating Foaming Process of Porous Al-Ni Intermetallics Assisted by Combustion Reactions
The self-propagating foaming process of porous Al-Ni intermetallics was investigated. Aluminum and nickel powders were blended, and titanium and boron carbide powders were added as reactive exothermic agents. The blended powder was extruded to make a rod-shape precursor. Only one end of the rod precursor was heated to ignite the reaction. The reaction propagated spontaneously throughout the pre...
متن کاملCreep of Ni-Al and Ni-Cr-Al Superalloy Foams
The steady-state creep rate of Ni-base metallic foams, with superalloy composition (in wt. pct) Ni7.8∼9.1Al (relative density, ρ = 2.5-2.6) and Ni-13.5∼16.6Cr-5.1∼8.9Al (ρ = 2.8∼3.0), was measured under a range of temperatures (680∼825°C) and applied stresses (0.1∼0.3 MPa), and compared with that of NiAl intermetallic foams (ρ = 5.3). The stress exponent and activation energy are within the exp...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملPrecipitation in a Ni - Al - Mo Directionally Solidified Eutectic Composite
The most recently developed high temperature materials are known as in-situ composites or directionally solidified eutectics. Since the composites are formed during solidification, they have excellent morphological stabilities up to near their melting temperatures. The Ni-Al-Mo system has received the greatest attention for recent several years(1)~(3) since the alloy is expected to form a struc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2014
ISSN: 2079-6412
DOI: 10.3390/coatings4020231