Next Generation Post- combustion Capture: Combined CO2 and SO2 Removal
نویسندگان
چکیده
منابع مشابه
Control of a post-combustion CO2 capture plant during process start-up and load variations
Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...
متن کاملCapital Costs and Energy Considerations of Different Alternative Stripper Configurations for Post Combustion Co2 Capture
Capturing and storing the greenhouse gas carbon dioxide (CO2) produced by power plants and factories before it is emitted to the atmosphere could play a major role in minimizing climate change. Among of the different technologies, aqueous amine absorption/stripping is a promising one. In this study 5 different configurations for aqueous absorption/stripping have been compared with regard to cap...
متن کاملPost-Combustion Capture R&D at CSIRO
contact:Paul Feron phone: +61 (0) 2 4960 6022 email: [email protected] Introduction CSIRO has developed a post-combustion CO2 capture (PCC) R&D program consisting of two major components, a pilot plant programme and a laboratory research programme, which are operated in an integrated manner. The programme is almost exclusively focused on reactive liquid absorption liquids for the capture of C...
متن کاملSystems Analysis of Ionic Liquids for Post-combustion CO2 Capture at Coal-fired Power Plants
The main objective of this study is to investigate the feasibility and costs of ionic liquid (IL)-based CO2 capture systems at pulverized coal-fired (PC) power plants. The IL selected for this assessment is trihexyl(tetradecyl)phosphonium 2-cyanopyrrolide ([P66614][2-CNpyr]), achieving a 1:1 and reversible chemical reaction between [2-CNpyr] and CO2. A multi-stage equilibrium-based modeling fra...
متن کاملBiomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
A series of porous carbon materials obtained from biomass waste have been synthesized, with different morphologies and structural properties, and evaluated as potential adsorbents for CO2 capture in post-combustion conditions. These carbon materials present CO2 adsorption capacities, at 25°C and 101.3 kPa, comparable to those obtained by other complex carbon or inorganic materials. Furthermore,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2013
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2013.05.212