New white gold alloys
نویسندگان
چکیده
منابع مشابه
Characterization of 14 Karat Gold Alloys
This paper is a continuation of the project we presented at the 2010 Santa Fe Symposium® in which we defined a characterization system and analysis of data on 18K gold alloys. The research carried out since then has enabled us to connect the physical-mechanical characteristics of each alloy with its chemical composition, thereby identifying the best solution possible to produce a specific item....
متن کاملNickel release from white gold.
Nickel is still the most frequent cause of contact allergy, despite the EU regulation limiting nickel release from consumer items intended for prolonged contact with the skin, such as jewellery, buttons, and watches. It is obvious that the current restriction is insufficient (1). It has been shown that nickel is deposited onto the skin by short and repetitive contact in amounts sufficient to ca...
متن کاملTarnish Resistance, Corrosion and Stress Corrosion Cracking of Gold Alloys
Tarnishing, corrosion and stress corrosion cracking (SeC) of gold alloys are related phenomena. They present problems when they occur in gold jewellery, dental gold alloys and electronic devices. They are exploited, however, in the depletion gilding and finishing of gold jewellery; and in the extraction, refining and fire assaying of gold. There is still much that is not known about these pheno...
متن کاملEtching Techniques for Gold-Containing Ag3Sn Alloys and Amalgams*
Argon-ion etching and various other chemical etchants were applied to conventional and gold-containing dental alloys and amalgams. The polished and etched specimens were studied by optical and/or electron optical methods and by energy-dispersive x-ray spectroscopy. Chemical etchants, though effective, have the disadvantage of accentuating surface scratches. This, in turn, causes difficulty in t...
متن کاملan investigation on new ai-li alloys
the application of ai-li alloy in aerospace and aircrafts industries have a promising future due to its lower density and a comparatible mechanical properties to the other aluminum alloys. the major problems encountered with parts made of al-li alloys, include segregation and brittleness. the presence of a precipitation free zone (pfz) and also the concentration of some elements such as k,na,o,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Gold Bulletin
سال: 1981
ISSN: 0017-1557,2190-7579
DOI: 10.1007/bf03216555