New Freeze-Casting Technique for Ceramics with Sublimable Vehicles
نویسندگان
چکیده
منابع مشابه
Room-Temperature Freeze Casting for Ceramics with Nonaqueous Sublimable Vehicles in the Naphthalene–Camphor Eutectic System
Freeze casting for Al2O3 was accomplished at room temperature with nonaqueous sublimable vehicles in the naphthalene– camphor eutectic system with a eutectic temperature of 31°C. A fully dense sintered body (>99.5% of theoretical density (T.D.)) was obtained with a eutectic composition vehicle, whereas at most 90% T.D. was obtained with an off-eutectic (i.e., hypoor hypereutectic) composition v...
متن کاملBiomaterials by freeze casting.
The functional requirements for synthetic tissue substitutes appear deceptively simple: they should provide a porous matrix with interconnecting porosity and surface properties that promote rapid tissue ingrowth; at the same time, they should possess sufficient stiffness, strength and toughness to prevent crushing under physiological loads until full integration and healing are reached. Despite...
متن کاملReverse freeze casting: a new method for fabricating highly porous titanium scaffolds with aligned large pores.
Highly porous titanium with aligned large pores up to 500 μm in size, which is suitable for scaffold applications, was successfully fabricated using the reverse freeze casting method. In this process we have newly developed, the Ti powders migrated spontaneously along the pre-aligned camphene boundaries at a temperature of 45.5°C and formed a titanium-camphene mixture with an aligned structure;...
متن کاملBioinspired composites from freeze casting with clathrate hydrates
Freeze casting with isopropanol (IPA)–H2O as a freezing agent has shown the potential to create porous scaffolds with enlarged pores. Though not experimentally proven, this effect has been suggested to be the result of non-stoichiometric structures called clathrate hydrates forming during the freezing process. In this manuscript, we build upon these results to provide experimental evidence of t...
متن کاملInvestment Casting with Ice Patterns Made by Rapid Freeze Proto
One of the most promising applications of rapid freeze prototyping (RFP) is making metal parts by investment casting with the built ice parts. The integration of RFP and investment casting allows fast creation of complex net-shape metal parts directly from their CAD models. The advantages of doing so include no part geometric complexity limitation, no experience of parting line design and assem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Ceramic Society
سال: 2005
ISSN: 0002-7820,1551-2916
DOI: 10.1111/j.1151-2916.2004.tb06331.x