New Experimental Technique for Nodularity and Mg Fading Control in Compacted Graphite Iron Production on Laboratory Scale

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Damage evolution in compacted graphite iron during thermomechanical fatigue testing

Thermomechanical fatigue properties of a compacted graphite iron in an out of phase configuration are investigated for different maximum temperatures and mechanical strain ranges. Furthermore, the stress-strain hysteresis loops are analysed and in particular the unloading modulus, i.e. the elastic modulus measured during specimen unloading, is obtained from each cycle. This material parameter h...

متن کامل

INFLUENCE OF Al AND Ti ON MICROSTRUCTURE AND QUALITY OF COMPACTED GRAPHITE IRON CASTINGS

Compacted graphite cast iron is a material that again comes forward of the interest of designers and foundries acquiring or improving manufacture of castings from that material. From many publications let us quote three of them from last year 1, 2, 3 . According to the European standard ISO 16 112 this material is called „compacted (vermicular) graphite cast iron“ (the abbreviation CGI that wil...

متن کامل

An Experimental Investigation of the Influence of Cutting-Edge Geometry on the Machinability of Compacted Graphite Iron

Compacted graphite iron (CGI) is considered as the potential replacement of flake graphite iron (FGI) for the manufacturing of new generation high power diesel engines. Use of CGI, that have higher strength and stiffness as compared to FGI, allows engine to perform at higher peak pressure with higher fuel efficiency and lower emission rate. However, not only for its potential, CGI is of an area...

متن کامل

Thermo-mechanical and superimposed high-cycle fatigue interactions in compacted graphite iron

The e ect of adding a superimposed high-frequent strain load, denoted as a high-cycle fatigue strain component, upon a strain-controlled thermomechanical fatigue test has been studied on a compacted graphite iron ENGJV-400 for di erent thermo-mechanical fatigue cycles and high-cycle fatigue strain ranges. It is demonstrated that the successive application of an high-cycle fatigue load has a con...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Metallurgical and Materials Transactions A

سال: 2017

ISSN: 1073-5623,1543-1940

DOI: 10.1007/s11661-017-4315-3