New Developments on Powder Metallurgy Technology and Product Evaluation
نویسندگان
چکیده
منابع مشابه
New Analytical Developments for Uranium Based Powder
Powders and divided solids are widely used in industry as intermediate or finished products in many fields: foods, cosmetics, construction, pharmaceuticals, transport, electronics and, of course, nuclear energy. Optimizing their use requires control of processing based on an understanding of the phenomena involved (sintering, chemical reactivity, purity, etc.). Modeling and understanding these ...
متن کاملPorous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملModeling and Simulation of Press and Sinter Powder Metallurgy
EFFECTIVE COMPUTER SIMULATIONS of metal powder compaction and sintering are at the top of the powder metallurgy industry’s wish list. There is much anticipated advantage to such efforts, yet there are problems that will inhibit widespread implementation. Press-sinter powder metallurgy computer simulations currently focus on the use of minimal input data to help with process setup. Although the ...
متن کاملDevelopments on Product Propagation
Product Propagation (PP) is an algorithm to backup probabilistic evaluations for abstract two-player games. It was shown that PP could solve go problems as efficiently as Proof Number Search (PNS). In this paper, we exhibit a few domains where, for generic non-optimized versions, PP performs better than previously known algorithms for solving games. The compared approaches include alpha-beta se...
متن کاملMultiprobe impedance measurement system for nondestructive evaluation and test of "green state" powder metallurgy parts
This paper describes an instrument capable of detecting flaws in "green-state" (prior to sintering) powder metallurgy (P/M) parts. The instrument uses a matrix of impedance measurements from a multiprobe array which contacts the surface of the P/M part. The array of measured data is processed to not only detect the presence of flaws, but also determine their location, size, and orientation. Exp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Funtai oyobi fummatsu yakin
سال: 2021
ISSN: ['0532-8799', '1880-9014']
DOI: https://doi.org/10.2497/jjspm.68.51