Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method
نویسندگان
چکیده
An analysis of the shape memory effect a NiTi alloy by using spark plasma sintering approach has been carried out. Spark Ti50Ni50 powder (20–63 µm) at temperature 900 °C produced specimens showing good effects. However, sample showed 2.5% porosity due to load 48 MPa. Furthermore, an apparent was recorded and were characterized uniformity in chemical composition alloys significant austenite phases with bending strain recovery >2.5%.
منابع مشابه
Nanofretting behaviors of NiTi shape memory alloy
Nanofretting behaviors of NiTi shape memory alloy Linmao Qian a, Zhongrong Zhou a,∗, Qingping Sun b, Wenyi Yan c a Tribology Research Institute, National Traction Power Laboratory, Southwest Jiaotong University, Chengdu 610031, China b Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Hong Kong, China c School of Engineering and Information Technology, De...
متن کاملLaser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory properties
We present the results of a crystallization study on NiTi shape memory thin films in which amorphous films are annealed by a scanning laser. This technique has the advantage that shape memory properties can be spatially distributed as required by the application. A kinetics study shows that nucleation of the crystalline phase occurs homogenously in the films. Consequently, the laser annealing p...
متن کاملOn the Damping Behaviour of Niti Shape Memory Alloy
Shape memory alloys exhibit a high damping capacity in the mktensite state. Results obtained from both DMA and cyclic tests under tension-compression load show that the martensite damping capacity in NiTi SMAs is a function of both strain amplitude and annealing temperature. Internal friction due to movements of martensite twin boundaries within both elastic (accommodation) and inelastic (reori...
متن کاملUltrasonically assisted turning of NiTi based shape memory alloy
In this study, vibration cutting has been applied to machining of a novel material, NiTi based shape memory alloy (SMA), using a commercial ultrasonic piezoelectric transducer to vibrate an ISO insert CCMT geometry cutting tool. The effect of vibration in turning process was characterized by investigating the surface roughness of workpiece and surface quality assessment of machined surface usin...
متن کاملStructural transformations in NiTi shape memory alloy nanowires
Reza Mirzaeifar, Ken Gall, Ting Zhu, Arash Yavari, and Reginald DesRoches George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, USA School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, USA School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied sciences
سال: 2021
ISSN: ['2076-3417']
DOI: https://doi.org/10.3390/app11041802