Near-surface common-midpoint seismic data recorded with automatically planted geophones
نویسندگان
چکیده
منابع مشابه
Automatically tying well logs to seismic data
Seismic data are recorded and commonly interpreted in vertical two-way time; well logs, measured in depth, must be tied to seismic using a time-depth curve. However, well ties contain a large amount of uncertainty due to errors in the generation of synthetic seismograms and manual matching of synthetic seismograms to seismic traces. Using dynamic time warping, a fast algorithm that optimally al...
متن کاملApplication of Near Surface Mounted (NSM) technique for Seismic Retrofitting of Heritage Buildings
The high vulnerability of the cultural buildings due to seismic actions urged researchers to retrofit them using reversible and compatible techniques. The application of fiber reinforced polymer (FRP) for enhancing the structural behavior of masonry buildings, under seismic actions, has been studied by many researchers. The near-surface mounting (NSM) technique is a relatively new retrofitting ...
متن کاملEstimating near-surface shear wave velocities in Japan by applying seismic interferometry to KiK-net data
We estimate shear-wave velocities in the shallow subsurface throughout Japan by applying seismic interferometry to the data recorded with KiK-net, a strongmotion network in Japan. Each KiK-net station has two receivers; one receiver on the surface and the other in a borehole. By using seismic interferometry, we extract the shear wave that propagates between these two receivers. Applying this me...
متن کاملThe Effects of Thin, Near-surface Layers on Seismic Signals
Signals generated by moving tracked vehicles can be significantly affected by near-surface materials including pavements, compacted soils, shallow bed rock, and the water table. The ways that seismic signals depend on these surface layers are examined by analyzing impulsive point forces applied at the earth-air interface. Fields are calculated using a plane layered frequency domain wavenumber m...
متن کاملNear-surface VSP surveys using the seismic cone penetrometer
We have found that high-quality vertical seismic profile (VSP) data can be collected for near-surface applications using the seismic cone penetrometer. Conemounted accelerometers are used as the VSP receivers, and a sledgehammer against the cone truck baseplate is used as a source. This technique eliminates the need to drill a borehole, thereby reducing the cost of the survey, and results in a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Geophysical Research Letters
سال: 2005
ISSN: 0094-8276
DOI: 10.1029/2005gl023735