Nano/ultrafine grained immiscible Fe-Cu alloy with ultrahigh strength produced by selective laser melting
نویسندگان
چکیده
A nano/ultrafine grained immiscible Fe-Cu alloy was produced using selective laser melting (SLM) with an average grain size of 250?nm and many 50–100?nm, the finest ever achieved additive man...
منابع مشابه
Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering.
Selective laser melting (SLM), a method used in the nuclear, space, and racing industries, allows the creation of customized titanium alloy scaffolds with highly defined external shape and internal structure using rapid prototyping as supporting external structures within which bone tissue can grow. Human osteoblasts were cultured on SLM-produced Ti6Al4V mesh scaffolds to demonstrate biocompati...
متن کاملFailure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting
http://dx.doi.org/10.1016/j.matdes.2014.10.063 0261-3069/ 2014 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/). ⇑ Corresponding authors. Tel.: +61 8 6488 3124 (T.B. Sercombe), +44 1235 567789 (P.D. Lee). E-mail addresses: [email protected] (T.B. Sercombe), peter.lee@ manchester.ac.uk (P.D. Lee). 1...
متن کاملFabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 alloy using Selective Laser Melting**
The expansion in application of the selective laser melting (SLM) process for fabrication of new alloy materials continues. However, to date, there has been no investigation of the effect of this process on the final microstructure of ‘melt sensitive’ powder alloys such as mechanically alloyed oxide dispersion strengthened (ODS) FeCrAl. In this study commercial PM2000 powder, a ferritic ODS all...
متن کاملHigh Specific Strength And Stiffness Structures Produced Using Selective Laser Melting
Selective Laser Melting (SLM) was used to fabricate scaffolds using the titanium alloy Ti6Al-4V. Two types of high porosity open-cell structures were manufactured: the first built from topology optimised designs with maximised stiffness, and the second from gyroid labyrinths. In mechanical compression tests the scaffolds demonstrate exceptional strengthand stiffness-to-weight ratios. In particu...
متن کاملResidual Stress, Defects and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Selective Laser Melting
For large-scale selective laser melting (SLM) additive manufacturing technology, three main problems severely restrict its development and application, namely the residual stress, defects, and columnar grains with anisotropy. To overcome these problems, a new method is proposed by combining SLM with ultrasonic impact treatment (UIT) technique. This study explores the feasibility of UIT assisted...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials research letters
سال: 2021
ISSN: ['2166-3831']
DOI: https://doi.org/10.1080/21663831.2021.1884620