Nanostructured ion beam-modified Ge films for high capacity Li ion battery anodes
نویسندگان
چکیده
منابع مشابه
Nanostructured ion beam-modified Ge films for high capacity Li ion battery anodes
Related Articles Three-dimensional elemental mapping of hollow Fe2O3@SiO2 mesoporous spheres using scanning confocal electron microscopy Appl. Phys. Lett. 100, 213117 (2012) High thermal conductivity epoxy-silver composites based on self-constructed nanostructured metallic networks J. Appl. Phys. 111, 104310 (2012) Comment on “Advanced mechanical properties of graphene paper” [J. Appl. Phys. 10...
متن کاملHigh capacity Li ion battery anodes using ge nanowires.
Ge nanowire electrodes fabricated by using vapor-liquid-solid growth on metallic current collector substrates were found to have good performance during cycling with Li. An initial discharge capacity of 1141 mA.h/g was found to be stable over 20 cycles at the C/20 rate. High power rates were also observed up to 2C with Coulombic efficiency > 99%. Structural characterization revealed that the Ge...
متن کاملProtected High - Capacity Anodes for Li - Ion Battery Applications
The lithium-ion battery (LIB) is a widely used energy storage system with applications spanning from small electronics to automobiles. An important figure of merit for LIBs is specific capacity, typically reported in mAh/g. One way to improve the overall capacity of LIBs is to replace the ubiquitous carbon anode with silicon or tin, which promise specific capacity of 4,000 and 994 mAh/g, respec...
متن کاملRice husks as a sustainable source of nanostructured silicon for high performance Li-ion battery anodes
The recovery of useful materials from earth-abundant substances is of strategic importance for industrial processes. Despite the fact that Si is the second most abundant element in the Earth's crust, processes to form Si nanomaterials is usually complex, costly and energy-intensive. Here we show that pure Si nanoparticles (SiNPs) can be derived directly from rice husks (RHs), an abundant agricu...
متن کاملHigh-Capacity, Microporous Cu6Sn5–Sn Anodes for Li-Ion Batteries
Three-dimensional, microporous Cu6Sn5–Sn architectures were created by electrodeposition of copper and tin onto sintered copper foam substrates and evaluated as anodes for lithium-ion batteries. The electrodes were characterized before and after cycling by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectrometry. Before cycling, the electrochemically deposited f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2012
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.3689781