Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
نویسندگان
چکیده
منابع مشابه
Photodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method
In this paper, a modified sol-gel method using peroxotitanic acid sol (PTA) was applied for the preparation of TiO2 nanostructured thin films on glass plates. The peroxotitanic acid sol was synthesized using titanium isopropoxide, isopropylalchol, H2O and hydrogen peroxide. TiO2 films were then calcined at 500oC and characterized by X-ray diffraction ...
متن کاملPhotodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method
In this paper, a modified sol-gel method using peroxotitanic acid sol (PTA) was applied for the preparation of TiO2 nanostructured thin films on glass plates. The peroxotitanic acid sol was synthesized using titanium isopropoxide, isopropylalchol, H2O and hydrogen peroxide. TiO2 films were then calcined at 500oC and characterized by X-ray diffraction ...
متن کاملScreen Printing Process Design of Experiments for Fine Line Printing of Thick Film Ceramic Substrates
Screen printing has been the dominant method of thick film deposition because of its low cost. Many experiments in industry have been done and many models of the printing process have been developed since the 1960’s. With a growing need for denser packaging and a drive for higher pin count, screen printing has been refined to yield high resolution prints. However, fine line printing is still co...
متن کاملphotodegradation of reactive red 222 using tio2 nanostructured thin films prepared by modified sol-gel method
in this paper, a modified sol-gel method using peroxotitanic acid sol (pta) was applied for the preparation of tio2 nanostructured thin films on glass plates. the peroxotitanic acid sol was synthesized using titanium isopropoxide, isopropylalchol, h2o and hydrogen peroxide. tio2 films were then calcined at 500oc and characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem)...
متن کاملHigh loading of nanostructured ceramics in polymer composite thick films by aerosol deposition
Low temperature fabrication of Al2O3-polyimide composite substrates was carried out by an aerosol deposition process using a mixture of Al2O3 and polyimide starting powders. The microstructures and dielectric properties of the composite thick films in relation to their Al2O3 contents were characterized by X-ray diffraction analysis. As a result, the crystallite size of α-Al2O3 calculated from S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processing and Application of Ceramics
سال: 2013
ISSN: 1820-6131,2406-1034
DOI: 10.2298/pac1303129a