منابع مشابه
Enhanced Thermal Stability in Nanostructured Bainitic Steel
We report an attempt at increasing the thermal stability of nanocrystalline bainite to tempering heat-treatments, by enhancing the silicon concentration of the alloy. Validation experiments have been conducted using synchrotron X-radiation during tempering heat treatment. It is found that the change in alloying successfully stabilises the austenite at elevated temperatures by retarding cementit...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کاملNanomechanical characterization of nanostructured bainitic steel: Peak Force Microscopy and Nanoindentation with AFM
The full understanding of the deformation mechanisms in nanostructured bainite requires the local characterization of its mechanical properties, which are expected to change from one phase, bainitic ferrite, to another, austenite. This study becomes a challenging process due to the bainitic nanostructured nature and high Young's modulus. In this work, we have carried out such study by means of ...
متن کاملNanostructured bainitic steel obtained by powder metallurgy approach: structure, transformation kinetics and mechanical properties
A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...
متن کاملEffect of Austenitising Temperature on Mechanical Properties of Nanostructured Bainitic Steel
Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2020
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2018-693