Nanosilicon dioxide hydrosol as surfactant for preparation of microencapsulated phase change materials for thermal energy storage in buildings
نویسندگان
چکیده
منابع مشابه
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage
Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...
متن کاملThermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage
In this research, structural-functional integrated cement-based materials were prepared by employing cement paste and a microencapsulated phase change material (MPCM) manufactured using urea-formaldehyde resin as the shell and paraffin as the core material. The encapsulation ratio of the MPCM could reach up to 91.21 wt%. Thermal energy storage cement pastes (TESCPs) incorporated with different ...
متن کاملMicroencapsulation of Phase Change Materials for Thermal Energy Storage in Building Application
This paper presents an investigation on microencapsulation of paraffin as a phase change materials (PCMs) for application in buildings. Encapsulated PCM particles were prepared by suspension-like polymerization technique. The effect of surfactant concentration and mass ratio of PCM to monomer on the final characteristics and performance of the microcapsules were investigated. The distribution o...
متن کاملPreparation and Characterization of Microencapsulated Phase Change Materials for Use in Building Applications
A method for preparing and characterizing microencapsulated phase change materials (MPCM) was developed. A comparison with a commercial MPCM is also presented. Both MPCM contained paraffin wax as PCM with acrylic shell. The melting temperature of the PCM was around 21 °C, suitable for building applications. The M-2 (our laboratory made sample) and Micronal® DS 5008 X (BASF) samples were charact...
متن کاملApplication of Phase Change Materials and Pcm-slurries for Thermal Energy Storage
The idea to use phase change materials (PCM) for the purpose of storing thermal energy is to make use of the latent heat of a phase change, usually between the solid and the liquid state. Since a phase change involves a large amount of latent energy at small temperature changes, PCMs are used for temperature stabilization and for storing heat with large energy densities in combination with rath...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Low-Carbon Technologies
سال: 2018
ISSN: 1748-1325
DOI: 10.1093/ijlct/cty032