Nanosecond monolithic Mach-Zehnder fiber switch
نویسندگان
چکیده
منابع مشابه
Adiabatic thermo-optic Mach-Zehnder switch.
In this Letter, we propose and demonstrate a high-speed and power-efficient thermo-optic switch using an adiabatic bend with a directly integrated silicon heater to minimize the heat capacity and therein maximize the performance of the thermo-optic switch. A rapid, τ=2.4 μs thermal time constant and a low electrical power consumption of P(π)=12.7 mW/π-phase shift were demonstrated representing ...
متن کاملAll-fiber three-path Mach-Zehnder interferometer.
We report the realization of a three-path Mach-Zehnder interferometer using single-mode fibers and two integrated 3 x 3 fiber couplers. We observed enhanced phase sensitivity, as compared with two-path interferometers, with a visibility of the interference pattern of more than 97%. This interferometer has an analog in two-photon interferometry, and we believe it to be the first nontrivial examp...
متن کاملHigh speed hybrid silicon evanescent Mach-Zehnder modulator and switch.
We demonstrate the first high speed silicon evanescent Mach Zehnder modulator and switch. The modulator utilizes carrier depletion within AlGaInAs quantum wells to obtain V(pi) L of 2 V-mm and clear open eye at 10 Gb/s. The switch exhibits a power penalty of 0.5 dB for all ports at 10 Gb/s modulation.
متن کاملDynamic Strain Measured by Mach-Zehnder Interferometric Optical Fiber Sensors
Optical fibers possess many advantages such as small size, light weight and immunity to electro-magnetic interference that meet the sensing requirements to a large extent. In this investigation, a Mach-Zehnder interferometric optical fiber sensor is used to measure the dynamic strain of a vibrating cantilever beam. A 3 × 3 coupler is employed to demodulate the phase shift of the Mach-Zehnder in...
متن کاملUltra-Abrupt Tapered Fiber Mach-Zehnder Interferometer Sensors
A fiber inline Mach-Zehnder interferometer (MZI) consisting of ultra-abrupt fiber tapers was fabricated through a new fusion-splicing method. By fusion-splicing, the taper diameter-length ratio is around 1:1, which is much greater than those (1:10) made by stretching. The proposed fabrication method is very low cost, 1/20-1/50 of those of LPFG pair MZI sensors. The fabricated MZIs are applied t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2012
ISSN: 1094-4087
DOI: 10.1364/oe.20.029309