Nanoscale High-Tc YBCO/GaN Super-Schottky Diode
نویسندگان
چکیده
منابع مشابه
Schottky Diode Graphene Based Sensors
In this paper, we aim to demonstrate a novel scheme for integration of nanostructured semiconductor Graphene Oxide (GO) shottky diodes on flexible substrate for a wide range of sensing applications. The platform introduces a novel flexible GO/Pt/n-Si and GO/Pt/SiN composite structures which provides excellent optical and electrical properties, while maintaining an acceptable mechanical, biocomp...
متن کاملTeraHertz Schottky-Diode Balanced Mixers
We report on the first THz balanced mixer/upconverter using a Schottky diode MMIC chip. Using an optically pumped laser at 1562 GHz as an LO source with a coupled power of about 1 mW, and 1 mW input at an IF frequency of 10 GHz, we obtained a sideband output power of 23 uW (sum of two sidebands). As a mixer, at an LO of 1621 GHz, we obtain a conversion loss of 12.4 dB DSB and a noise temperatur...
متن کاملEffects of the Spacer Length on the High-Frequency Nanoscale Field Effect Diode performance
The performance of nanoscale Field Effect Diodes as a function of the spacer length between two gates is investigated. Our numerical results show that the Ion/Ioff ratio which is a significant parameter in digital application can be varied from 101 to 104 for S-FED as the spacer length between two gates increases whereas this ratio is approximately constant for M-FED. The high-frequency perform...
متن کاملCopper phthalocyanine based Schottky diode solar cells
Copper phthalocyanine (CuPc)/Aluminum (Al) Schottky diode solar cells were studied. The thickness of the CuPc layer was varied from 15 nm to 140 nm. Short circuit current densities (Jsc) increased with thickness from 0.042 mA/cm at 15 nm to 0.124 mA/cm at 120 nm reaching saturation at that level. Open circuit voltages (Voc) increased from 220 mV at 15 nm to 907 mV at 140 nm. Analysis of the cur...
متن کاملDevelopment of Diamond Schottky Barrier Diode
Diamond, which has excellent physical properties, is attractive for use in industrial applications. Because diamond is rated the highest for hardness and heat conductivity among all known materials, it is widely used for products such as abrasive grains, cutting tools, and heatsinks. Diamond also exhibits excellent transparency even in the ultraviolet range and can be applied to optical tools. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2018
ISSN: 2045-2322
DOI: 10.1038/s41598-018-23882-6