Nanoscale anisotropic Nd-Fe-B particles with high coercivity prepared by attrition milling
نویسندگان
چکیده
منابع مشابه
COERCIVITY AND THERMAL REMAGNETIZATION OF SINTERED Nd-Fe-B
Statistical methods are used to estimate coercivity J Hc and thermal remagnetization of uniaxially nucleationcontrolled permanent magnetic materials. Sintered Nd-Fe-B consists of the tetragonal magnetic Nd2FelrB phase with a volume fraction w = 80 % and of nonmagnetic phases. At temperatures above T, rz 150 K the tetragonal axis is the easy direction of magnetization [I]. It is well known [2] t...
متن کاملEnhanced coercivity in thermally processed „Nd,Dy...„Fe,Co,Nb,B...5.5/a-Fe nanoscale multilayer magnets
Structural and magnetic properties of laminated sNd,DydsFe,Co,Nb,Bd5.5 /Fe nanocomposites are investigated. Normally, the addition of the soft phase to the hard phase enhances the remanence but deteriorates the permanent-magnet performance of the material by reducing the coercivity. In the present system, the coercivity increases to 1608 kA/m s20.2 kOed in thermally processed Nd–Dy–Fe–Co–Nb–Bs1...
متن کاملCoercivity enhancement of Nd-Fe-B sintered magnets by grain boundary modification via reduction-diffusion process
The interface between the Nd2Fe14B particles and the grain boundary surrounding them in Nd-Fe-B sintered magnets was modified by diffusion Dy metal selectively through the grain boundary involving the reduction of Dy2O3 or DyF3 with CaH2 and the coercivity of them was effectively enhanced from 0.98 MA/m to 1.42 MA/m with keeping the high value of remanence. The resultant coercivity was higher t...
متن کاملRelation between domain wall motion and coercivity in Nd-Fe-B sintered magnets prepared in various conditions
For the study of the relationship between the domain wall motion (DWM) and the coercivity in the samples of Dy-free Nd-Fe-B sintered magnets, the DC susceptibility (χDC) in the initial magnetization from the thermally demagnetized state and the DWM in the partially demagnetized state after the full magnetization in 5T-pulse field were measured. In the high coercivity (μ0Hc) samples of μ0Hc=1.35...
متن کاملStrong textured SmCo5 nanoflakes with ultrahigh coercivity prepared by multistep (three steps) surfactant-assisted ball milling
The high coercivity of 26.2 kOe for SmCo5 nanoflakes are obtained by multistep (three steps) surfactant-assisted ball milling. The magnetic properties, phase structure and morphology are studied by VSM, XRD and SEM, respectively. The results demonstrate that the three step ball-milling can keep more complete crystallinity (relatively less defects) during the process of milling compared with one...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2013
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.4808434