Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075
نویسندگان
چکیده
منابع مشابه
Dynamic Shear Behaviour of Unweldable Aluminum-Scandium (Al-Sc) Alloy
This study uses a torsional split-Hopkinson bar to investigate the shear response and fracture characteristics of unweldable Al-Sc alloy during mechanical testing at shear strain rates of 800 s , 1500 s , 2200 s 1 and 2800 s 1 and temperatures of 150 C, 25 C and 300 C. The experimental results show that both the shear strain rate and the temperature have a significant effect on the shear proper...
متن کاملImproved Microstructure and Properties of 6061 Aluminum Alloy Weldments Using a Double-Sided Arc Welding Process
Due to its popularity and high crack sensitivity, 6061 aluminum alloy was selected as a test material for the newly developed double-sided arc welding (DSAW) process. The microstructure, crack sensitivity, and porosity of DSAW weldments were studied systematically. The percentage of fine equiaxed grains in the fully penetrated welds is greatly increased. Residual stresses are reduced. Porosity ...
متن کاملSolidification Behavior of Al-Mg Aluminum Alloy Using Double-Sided Arc Welding Process
As popular aluminum alloys, the 5xxx Al-Mg series, such as 5050 and 5052, etc., are widely used in applications such as automobile, pressure vessels, armor plate, and components for marine and cryogenic service. In this, as in all non-heat-treatable aluminum alloys, the weld metal zone is considered to be the weakest part of the joint and is the location of failure when the joint is loaded in t...
متن کاملPaper EXPOSURE ASSESSMENT OF ALUMINUM ARC WELDING RADIATION
The purpose of this study is to evaluate the nonionizing radiation (NIR) exposure, especially optical radiation levels, and potential health hazard from aluminum arc welding processes based on the American Conference of Governmental Industrial Hygienists (ACGIH) method. The irradiance from the optical radiation emissions can be calculated with various biological effective parameters i.e., S( ),...
متن کاملDevelopment of an Artificial Neural Network Constitutive Model for Aluminum 7075 Alloy
Development of an accurate neuronal material model for aluminum alloys would facilitate better process control and parameter optimization in the aircraft industry. This research primarily attempts to design a connectionist constitutive model for aluminum 7075 alloy using multi-layer perceptrons. The backpropagation algorithm is used to train the designed network whose performance is then valida...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2019
ISSN: 2041-1723
DOI: 10.1038/s41467-018-07989-y