Nanoparticle Deposition During Cu-Water Nanofluid Pool Boiling
نویسندگان
چکیده
منابع مشابه
Infrared thermometry study of nanofluid pool boiling phenomena
Infrared thermometry was used to obtain first-of-a-kind, time- and space-resolved data for pool boiling phenomena in water-based nanofluids with diamond and silica nanoparticles at low concentration (<0.1 vol.%). In addition to macroscopic parameters like the average heat transfer coefficient and critical heat flux [CHF] value, more fundamental parameters such as the bubble departure diameter a...
متن کاملPool boiling of water-Al2O3 and water-Cu nanofluids on horizontal smooth tubes
Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...
متن کاملPool Boiling Heat Transfer in Water/Amines Solutions
In this investigation, nucleate boiling heat transfer coefficients were experimentally measured during pool boiling of mixtures, consisting of water/monoethanolamine and water/diethanolamine on a horizontal heating rod, under atmospheric pressure. The experiment was carried out below 205 kW.m-2 heat flux, over a wide range of concentrations. These experiments include, measurement of pool boilin...
متن کاملPool boiling of nanoparticle-modified surface with interlaced wettability
This study investigated the pool boiling heat transfer under heating surfaces with various interlaced wettability. Nano-silica particles were used as the coating element to vary the interlaced wettability of the surface. The experimental results revealed that when the wettability of a surface is uniform, the critical heat flux increases with the more wettable surface; however, when the wettabil...
متن کاملNanoparticle Deposition by Boiling on Aluminum Surfaces to Enhance Wettability
Surface wettability of materials is important in a myriad of HVAC&R processes. This study is focused on how to manipulate wettability by nanofluid boiling nanoparticle deposition on aluminum surfaces. The focus is on aluminum, because it is commonly used as the material for heat transfer in air conditioning and refrigeration systems. The boiling deposition process occurs under atmospheric press...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2017
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/923/1/012004