Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al–Cu alloy
نویسندگان
چکیده
منابع مشابه
Toughness-Strength Relations in the Overaged 7449 Al-Based Alloy
COST reduction is a key objective of modern airframe The 7449 and 7150 plates, respectively 30and 36-mm manufacture. This can be achieved by the design of materials thick, were provided by Pechiney CRV (Voreppe, France) with improved properties leading to weight reduction of the in a solutionized, quenched, and stretched condition (corresairframe structure and, therefore, reduction in fuel cons...
متن کاملFracture toughness and fatigue crack growth characteristics of nanotwinned copper
Recent studies have shown that nanotwinned copper (NT Cu) exhibits a combination of high strength and moderate ductility. However, most engineering and structural applications would also require materials to have superior fracture toughness and prolonged subcritical fatigue crack growth life. The current study investigates the effect of twin density on the crack initiation toughness and stable ...
متن کاملEffects of Magnesium on Niobium Segregation and Impact Toughness in Cast Alloy 718
A program has been conducted on the effects of Mg in cast alloy 718. The results show that small amounts of Mg improves impact toughness and decreases Nb segregation by decreasing secondary dendrite arm spacing which results in less and smaller interdendritic Laves and MC eutectics. Small amounts of Mg produce a more spheroidal as well as a more dispersive MC phase. Impact toughness was found t...
متن کاملSTRENGTH AND FRACTURE TOUGHNESS OF WHISKER REINFORCED DENTAL RESIN-BASED COMPOSITES
Enhancing the properties of dental resin composites is of interest to researchers. The objective of the present investigation was to improve the strength and fracture toughness of dental composites via addition of silicon carbide whiskers and substitution of commonly used filler materials with stabilized zirconia ceramic powder. It was also intended to study the effect of powder- to- whisker ra...
متن کاملGrain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions
Effects of different amounts of lead (Pb) and tin (Sn) on microstructure and tensile properties of the AZ91 alloy were studied. The results presented that the microstructure of AZ91 alloy is consisted the α-Mg phase and semi-continuous network of β-Mg17Al12 intermetallics. For the as-cast AZ91 alloy, the average grain siz and the β phase volume fraction were 96.2 µm and of 25.3%, respectively. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2019.108221