Nanocrystallization in Fe-C Alloys by Ball Milling and Ball Drop Test.
نویسندگان
چکیده
منابع مشابه
Two-phase coexistence in Fe–Ni alloys synthesized by ball milling
We used mechanical alloying with a Spex 8000 mixer/mill to synthesize a series of Fe1002xNix alloys from x50 to x549. The Spex mill was modified so that it could also operate at a reduced milling intensity, and we compared the alloys synthesized after long times with the normal and reduced milling intensities. X-ray diffractometry and Mössbauer spectrometry were used to measure the volume fract...
متن کاملSintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...
متن کاملMechanochemical decomposition of pentachlorophenol by ball milling.
The mechanochemical dechlorination of pentachlorophenol (PCP) was studied using CaO and SiO2 powder as additives. The effects of the milling time and additives on the dechlorination rate were investigated. The resulting product was characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), thermogravimetric analysis (TG) and ion chromatography (IC). It is found that g...
متن کاملReview of Micro-Particles of Hydroxyapatite Nanoparticles by Ball Milling
Hydroxyapatite (HA) is the most important bioactive ceramics because of biocompatibility and structural similarity to the mineral part of bones and teeth of broad clinical application in the field of dentistry, orthopedic and coatings are Biomaterials. The aim of this study was to construct nano-hydroxyapatite micro particles using calcite, silica and zinc oxide using ball milling, powder, thes...
متن کاملCombined DEM and SPH simulation of ball milling
A deeper understanding of the milling operation of ball mills helps mineral processing engineers to control and optimize them, and therefore, reduce their consuming power. In this work, the milling operation of ball mills is investigated using two methods, i.e. DEM and combined DEM-SPH. First, a pilot scale ball mill with no lifter is simulated by both methods. Then another pilot scale ball mil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2002
ISSN: 0915-1559
DOI: 10.2355/isijinternational.42.1430