Nanocrystalline Cermet Coatings for Erosion–Corrosion Protection
نویسندگان
چکیده
منابع مشابه
Nanocrystalline materials and coatings
In recent years, near-nano (submicron) and nanostructured materials have attracted increasingly more attention from the materials community. Nanocrystalline materials are characterized by a microstructural length or grain size of up to about 100 nm. Materials having grain size of 0.1 to 0.3 mm are classified as submicron materials. Nanocrystalline materials exhibit various shapes or forms, and ...
متن کاملPulsed plasma deposition of chromium oxide/chromium-cermet coatings
A novel radio frequency magnetron sputtering method for the deposition of composite films which consist of chromium oxide and chromium ~Cr2O3/Cr-cermet! is presented. As an extension to conventional reactive sputtering of a Cr target in an argon and oxygen atmosphere the oxygen flow into the process chamber is switched periodically on and off. This leads to an oscillating oxygen partial pressur...
متن کاملCorrigendum to “Microscopic Examination of Cold Spray Cermet Sn+In2O3 Coatings for Sputtering Target Materials”
[This corrects the article DOI: 10.1155/2017/4058636.].
متن کاملMicroscopic Examination of Cold Spray Cermet Sn+In2O3 Coatings for Sputtering Target Materials
Low-pressure cold spraying is a newly developed technology with high application potential. The aim of this study was to investigate potential application of this technique for producing a new type of transparent conductive oxide films target. Cold spraying technique allows the manufacture of target directly on the backing plate; therefore the proposed sputtering target has a form of Sn+In2O3 c...
متن کاملInfluence of Vacuum Heat Treatment on the Residual Stress of Thermal Spray Cermet Coatings
and light microscopy were used to identify the changes after the heat-treatment. Microhardness and indentation modulus values were also investigated to analyse the changes in the mechanical properties after the heat-treatment. Results of this investigation indicated that the residual stress gradient within the coating material decreases after the heat-treatment, and the stress field in the subs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2019
ISSN: 2079-6412
DOI: 10.3390/coatings9060400