Nanocomposite Hard Coatings for Wear Protection

Hard Nanocomposite Coatings , Their Structure and Properties

Tribological and Wear Performance of Nanocomposite PVD Hard Coatings Deposited on Aluminum Die Casting Tool

In the aluminum die casting process, erosion, corrosion, soldering, and die sticking have a significant influence on tool life and product quality. A number of coatings such as TiN, CrN, and (Cr,Al)N deposited by physical vapor deposition (PVD) have been employed to act as protective coatings due to their high hardness and chemical stability. In this study, the wear performance of two nanocompo...

Wear stability of polymer nanocomposite coatings with trilayer architecture

A polymer trilayer (sandwiched) film with a thickness of 20–30 nm has been designed to serve as a wear resistant nanoscale coating for silicon surfaces. These surface structures are formed by a multiple grafting technique applied to self-assembled monolayers (SAM) and functionalized tri-block copolymer, followed by the photopolymerization of a topmost polymer layer. The unique design of this la...

Corrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings

In this paper, polymer-based nanocomposites powder were applied on the surface of plain carbon steel by electrostatic device and then were cured by microwave. The effect of adding nanoparticles on the corrosion resistance properties of the coatings was investigated by Electrochemical Impedance Spectroscopy and immersion test in 3.5 NaCl solution. Coatings structure and morphology of nanoparticl...

Preparation and Evaluation of Epoxy-Clay Nanocomposite Coatings for Corrosion Protection

Polymer-clay nanocomposite coatings have attracted much attention because of impressive enhancements of coating properties. In this research, both commercially available and isophoronediamine-modified montmorillonite clays were used to obtain epoxy-clay nanocomposite coatings. These nanocomposite materials with different clay loadings in the form of coatings were applied to cold-rolled steel (C...