Nanocomposite Ag:TiN thin films for dry biopotential electrodes
نویسندگان
چکیده
منابع مشابه
Laser processing of polymer nanocomposite thin films
Current biotechnology and sensor research has enhanced the drive to establish viable methods for depositing high-quality polymer thin films. In this research, thin films of poly methyl methacrylate PMMA were prepared by matrix-assisted pulsed-laser evaporation MAPLE . Up to 2 wt % of carbon nanotubes were subsequently added to MAPLE target systems for deposition of polymer nanocomposite films. ...
متن کاملNanocomposite Thin Films for both Mechanical and Functional Applications
The design methodology and realization of nanocomposite films aiming for mechanical (superhardness, toughness) and functional (optical, microelectronic) properties were discussed in this paper. Superhard TiCrCN and nc-TiN/a-SiNx films and super-tough nc-TiC/a-C(Al) films were prepared through co-sputtering method by optimal design of microstructure. The nanocrystalline silicon (nc-Si) passivate...
متن کاملSurfactant-Assisted Electrodeposition of CoFe-Barium Hexaferrite Nanocomposite Thin Films
The influences of anionic sodium dodecylsulfate (SDS) and cationic Hexadecyltrimethylammonium bromide (HTAB) surfactants on the incorporation and distribution of barium hexaferrite nanoparticles in the electrodeposited CoFe-BaFe12O19 composite thin films were studied. Sulphate bathes with natural pH containing 0 to 2 g/L surfactants were used for electroplating at room temperature. Field emissi...
متن کاملNoise in biopotential recording using surface electrodes
Electric events inside the human body cause potential differences on the skin. Surface electrodes can be used to measure these voltages. A surface electrode is in fact an electrochemical transducer. It converts the potential differences due to ion flows inside the human body into a measurable voltage. The measurement of bioelectric events is exposed to various sources of noise. The reactions th...
متن کاملDry-etch of As2S3 thin films for optical waveguide fabrication
Plasma etching to As2S3 thin films for optical waveguide fabrication has been studied using a helicon plasma etcher. The etching effects using the processing gases or gas mixtures of O2, Ar, and CF4 were compared. It was found that the O2 plasma had no chemical etching effect to the As2S3, but it could oxidize the surface of the As2S3. The Ar plasma provided a strong ion sputtering effect to th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Surface Science
سال: 2013
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2013.07.154