Nanoarchitectonics of ethylene propylene diene monomer (EPDM) composites reinforced with Cu–Al–Zn-alloy for ultrasonic array transducers’ fabrication
نویسندگان
چکیده
Abstract In response to the continuous demand for industry progress and need low-cost alternative materials that have superior properties than present ones, a new coupling agent was used treat composites, which were as backing in ultrasonic array transducers. transducers, back-echo reverberation piezoelectric elements occurs, so are critical reducing these echoes. The Cu–Al–Zn-alloy treated with before being incorporated into ethylene propylene diene monomer (EPDM) composites. Cu–Al–Zn-alloy/EPDM composites assessed using rheometric, mechanical, morphological properties. division of cu-alloy at EPDM matrix visualized scanning electron microscope (SEM). TGA DSC techniques study thermal characterization As result, Cu-alloy improved thermal, characteristics Ultrasonic measurements ensured composites' effectiveness Furthermore, composites’ similar those most commonly epoxy/tungsten material. Finally, linear ultrasonic-phased transducers fabricated They had low signal-to-noise ratio, this materials.
منابع مشابه
Mechanical, Thermal, Electrical and Morphology Characterization of Ethylene Propylene Diene Monomer - Nanoclay Composites
The effect of nanoclay in combination with other inter fillers in ethylene propylene diene monomer (EPDM) rubber vulcanizate were studied. Curing characteristics were carried out using rubber process analyzer (RPA). Mechanical, thermal and morphology characterization of EPDM nanoclay composites were studied.
متن کاملUltrasonic Examination of Fiber Reinforced Plastics Using Phased Array Transducers
This paper presents a data fusion method between the results of ultrasound using phased array at 5MHz frequency and those obtained through eddy current examination at 1-10MH frequency. The obtained results are compared with destructive tests, a very good correlation being obtained. The effects of delamination over the properties of CFRP are studied using dynamic mechanical analyzer, emphasizing...
متن کاملAn Integrated AHP-PROMETHEE Method for Selecting the most Suitable Ethylene Propylene Diene Termonomer
This paper considers the problem of selecting the most appropriate ethylene propylene diene monomer (EPDM), which is a polyolefin with a variety of usages in different areas. The metallocene catalyst, bis(2-phenyl indenyl) zirconium dichloride ((2-PhInd)2ZrCl2) was synthesized by a modified method and applied to the terpolymerization of ethylene, propylene, and 5-ethylidiene-2-norbornene (ENB)....
متن کاملElectromechanical Properties of Ethylene Propylene Diene Elastomers: Effect of Ethylene Norbornene Content
Ethylene propylene diene elastomers (EPDM) of various side chains and molecular weights were prepared as thin discs and the effects of electric field strength and temperature on the electromechanical properties were investigated. The electrical conductivity, the dielectric constant, the storage and loss moduli (G and G), the storage modulus response ( 1000V mm G ), and the storage modulus ...
متن کاملFabrication and mechanical properties of self-reinforced poly(ethylene terephthalate) composites
Self-reinforced poly(ethylene terephthalate) (PET) composites prepared by using a modified film-stacking technique were examined in this study. The starting materials included a high tenacity PET yarn (reinforcement) and a low melting temperature biodegradable polyester resin (matrix), both of which differ in their melting temperatures with a value of 56°C. This experiment produced composite sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics A
سال: 2023
ISSN: ['1432-0630', '0947-8396']
DOI: https://doi.org/10.1007/s00339-023-06688-w