Nano-structured alloy and composite coatings for high temperature applications
نویسندگان
چکیده
منابع مشابه
Cast Aluminum Alloy for High Temperature Applications
Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450°F (232°C) to about 750°F (400°C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cyl...
متن کاملTemperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy
In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...
متن کاملThick Sputtered Tantalum Coatings for High-Temperature Energy Conversion Applications
Thick sputtered tantalum (Ta) coatings on Inconel were investigated as a potential replacement for bulk refractory metal substrates used for high-temperature emitters and absorbers in thermophotovoltaic energy conversion applications. In these applications, high-temperature stability and high reflectance of the surface in the infrared wavelength range are critical in order to sustain operationa...
متن کاملRemanence enhancement in nano-structured composite magnets
The remanence of an isotropic nanocrystalline exchange-coupled composite system (comprising hard and soft magnetic phases) is investigated analytically within a simple (onedimensional) micromagnetic model, in which only exchange and anisotropy energies are considered. For a soft grain with size much less than its own Bloch wall width, our analysis shows that the magnetization distribution in th...
متن کاملSynthesis and thermoluminescence properties investigation of nano-structured alumina for high dose measurement
In this study, nanostructured alumina was synthesized by solution combustion method and its thermoluminescence properties was investigated. X-raydiffraction (XRD) and scanning electron microscopy (SEM) were conducted to investigate the crystal structure, morphology and the particle size of the powders. It was observed that nano structured α-Al2O3 particles with nano flake morphology and thickne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2004
ISSN: 1516-1439
DOI: 10.1590/s1516-14392004000100023