Nafion Thin Films: Fabrication of Micro‐ and Nanopatterned Nafion Thin Films with Tunable Mechanical and Electrical Properties Using Thermal Evaporation‐Induced Capillary Force Lithography (Adv. Mater. Interfaces 7/2021)
نویسندگان
چکیده
In article number 2002005, Hyung Jin Kim, Deok-Ho and co-workers describe a facile method for enhancing the pattern fidelity of Nafion thin films that utilizes thermal evaporation-induced capillary force lithography with swelling process. Mechanical electrical properties micro- nano-patterned can be controlled by adjusting curing temperature concentration.
منابع مشابه
architecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولElectrokinetic measurements of thin Nafion films.
We perform an electrokinetic characterization of ~300 nm Nafion films deposited on glass slides over a relatively unexplored region of ionic strength and pH. Owing to the small pore size of the Nafion, we probe the Nafion-fluid interface with the streaming potential measurement, and we probe ionic transport through the entire thickness of the Nafion film with the conductivity measurements. By a...
متن کاملEffect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films
Polyurethane/zeolite 13X nanocomposite films were fabricated using solution casting method. The synthesized nanocomposite films were structurally characterized using SEM, TGA and tensile analysis. SEM images showed appropriate distribution of nanocrystalline zeolite particles within polyurethane matrix. Better thermal stability of nanocomposite films in comparison to neat polyurethane was shown...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملEffect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films
Polyurethane/zeolite 13X nanocomposite films were fabricated using solution casting method. The synthesized nanocomposite films were structurally characterized using SEM, TGA and tensile analysis. SEM images showed appropriate distribution of nanocrystalline zeolite particles within polyurethane matrix. Better thermal stability of nanocomposite films in comparison to neat polyurethane was shown...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Interfaces
سال: 2021
ISSN: ['2196-7350']
DOI: https://doi.org/10.1002/admi.202170034