Multiscale failure analysis of fiber-reinforced composite structures via a hybrid cohesive/volumetric nonlinear homogenization strategy

Mathematical Modeling of Fiber Reinforced Structures by Homogenization

We present another proof of a study of Bellieud and Bouchitté that we expect to be more suitable to treat more general geometrical and physical cases. We consider the homogenization of the quasi-linear elliptic problem − div σε = f, σε = aε |∇uε|∇uε on Ω uε = u0 on Γ0 σε · n = g on Γ1 where Ω is a bounded cylindrical open subset of R and 1 < p < +∞. The fibers occupy a set of thin parallel cyli...

Hybrid carbon fiber composite lattice truss structures

failure and stress analysis of glass fiber reinforced laminated composite pinned joints

in this study, behavior of pin-loaded glass fiber reinforced with polyethylene laminated composites with different stacking sequence and different dimensions has been observed experimentally and stress analysis was performed using ansys software. the aim is to investigate stresses, failure strength and failure mode of composite laminates containing a pin loaded hole when the material exhibits l...

Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite

Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...

Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity

Fiber-reinforced laminated composites are frequently preferred in many engineering projects. With the development in production technology, the using of the fiber reinforced laminated composites has been increasing in engineering applications. In the production stage of the fiber-reinforced laminated composites, porosities could be occurred due to production or technical errors. After a level o...