Multiresponse Optimization of Edm Process with Nanofluids Using Topsis Method and Genetic Algorithm
نویسندگان
چکیده
منابع مشابه
Multiresponse Optimization of Process Parameters in Turning of GFRP Using TOPSIS Method
Taguchi's design of experiment is utilized to optimize the process parameters in turning operation with dry environment. Three parameters, cutting speed (v), feed (f), and depth of cut (d), with three different levels are taken for the responses like material removal rate (MRR) and surface roughness (R a ). The machining is conducted with Taguchi L9 orthogonal array, and based on the S/N analys...
متن کاملParametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm
The present investigation proposes a hybrid technique: Taguchi method, response surface methodology (RSM) and genetic algorithm (GA), to analyze, model and predict vibration and surface roughness in traverse cut cylindrical grinding of aluminum alloy. Experiments have been conducted as per L9 orthogonal array of Taguchi methodology using several levels of the grinding parameters. Analysis of va...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملUsing design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters
The main objectives of this research are, therefore, to assess the effects of process parameters and to determine their optimal levels machining of Inconel 718 super alloy. gap voltage, current, time of machining and duty factor are tuning parameters considered to be study as process input parameters. Furthermore, two important process output characteristic, have been evaluated in this research...
متن کاملAn empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm
Among the several non-conventional processes, electrical discharge machining (EDM) is the most widely and successfully applied for the machining of conductive parts. In this technique, the tool has no mechanical contact with the work piece and also the hardness of work piece has no effect on the machining pace. Hence, this technique could be employed to machine hard materials such as super allo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archive of Mechanical Engineering
سال: 2016
ISSN: 2300-1895
DOI: 10.1515/meceng-2016-0003