Multiple spike stall cells in low speed axial compressor rotor blade row
نویسندگان
چکیده
منابع مشابه
Numerical Simulation of Dynamic Stall Phenomena in Axial Flow Compressor Blade Rows
This article explores the simulation of stall phenomena in axial compressor blade rows. The approach is based on the numerical solution of the compressible, two-dimensional Navier-Stokes equations. The results of both unforced and forced low-speed rotor stall are presented. In unforced cases, substantial ow separation is observed before the maximum pressure rise operating point is reached. Thes...
متن کاملEffects of Different Turbulence Models in Simulation of Unsteady Tip Leakage Flow in Axial Compressor Rotor Blades Row
Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...
متن کاملInvestigation of Tip-leakage-vortex Breakdown and Its Role in Rotating Stall in a 1.5-stage Low-speed Axial-compressor
April 10-15, 2016 Abstract A whole-annulus unsteady numerical simulation is carried out to investigate the mechanism of the rotating stall in a 1.5-stage low-speed axial-compressor. By comparing the experimental and numerical results, the numerical results are validated. The numerical simulation captures the most features of the rotating stall of the 1.5-stage compressor observed from the exper...
متن کاملPresenting Three Design Methods for Axial Compressor Blade via Optimization
Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...
متن کاملComputational Study of Rotating Stall in High-Speed Compressor
A computational study of compressor instability based on body force representation of each blade-row of a transonic stage has been implemented for both clean inlet flow and flow with circumferential total pressure inlet distortion. The computational results indicate that many aspects related to compressor instability differ from what was observed in the experiment: steady compressor characteris...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Theoretical and Applied Mechanics
سال: 2015
ISSN: 1429-2955
DOI: 10.15632/jtam-pl.53.1.47