Multiphase-Field Modeling of Micropore Formation in Metallic Alloys
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولMetadislocations in Complex Metallic Alloys
Complex Metallic Alloys (CMAs) represent a large group of crystalline intermetallics comprising some hundreds of known phases in various alloy systems. They are characterized by the presence of icosahedral atom coordination, large lattice constants, and a correspondingly large number of atoms per unit cell, typically ranging between a few tens and some thousand [1]. In recent years, CMAs have a...
متن کاملDevelopment of Metallic Sensory Alloys
Existing nondestructive evaluation (NDE) technologies are inherently limited by the physical response of the structural material being inspected and are therefore not generally effective at the identification of small discontinuities, making the detection of incipient damage extremely difficult. One innovative solution to this problem is to enhance or complement the NDE signature of structural ...
متن کامل3D Phase-Field Simulation of Micropore Formation during Solidification: Morphological Analysis
A 3D multiphase-field (PhF) model has been developed in order to study the formation of a micropore constrained to grow in a solid network (i.e., pinching effect). The model accounts for the pressure difference due to capillarity between liquid and gas, the equilibrium condition at triple (solid-liquid-pore) lines, the partitioning and diffusion of dissolved gases such as hydrogen. From the pre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2014
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-014-2647-9