Multilayered 5052 aluminum alloy/titanium composites fabricated by cold pressure welding.

Composite Aluminum-Copper Sheet Material by Friction Stir Welding and Cold Rolling

Aluminum welding fume-induced pneumoconiosis.

Chronic exposure to high concentrations of fumes during aluminum arc welding causes a severe pneumoconiosis characterized by diffuse pulmonary accumulation of aluminum metal and a corresponding reduction in lung function. Aluminum fume-induced pneumoconiosis is a rarely reported entity, of which the true incidence is unknown. We report the clinical, radiographic, microscopic, and microanalytic ...

Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing

Surface composite layers were successfully fabricated on an A 1050-H24 aluminum plate by dispersed iron (Fe) and magnetite (Fe₃O₄) particles through friction stir processing (FSP). Fe and Fe₃O₄ powders were packed into a groove of 3 mm in width and 1.5 mm in depth, cut on the aluminum plate, and covered with an aluminum sheet that was 2-mm thick. A friction stir processing (FSP) tool of square ...

Effect of Internal Structure on Thermal Properties of Alumina/Aluminum Composites Fabricated by Gelate-Freezing and Partial-Sintering Process, Respectively

The purpose of the present work was to clarify the effects of parameters of porous ceramics on the characteristics of composites fabricated by high-pressure infiltration. Alumina with different porosity (15–70 vol%) and pore morphology was successfully fabricated by gelate-freezing and the partial-sintering, respectively. Alumina/aluminum composites were made by squeeze casting, the aluminum in...

B4C-Al Composites Fabricated by the Powder Metallurgy Process

Due to the large thermal neutron absorption cross section of 10B, B4C-Al composites have been used as neutron absorbing materials in nuclear industries, which can offer not only good neutron shielding performance but also excellent mechanical properties. The distribution of B4C particles affects the mechanical performance and efficiency of the thermal neutron absorption of the composite materia...