Multilayer (TiN, TiAlN) ceramic coatings for nuclear fuel cladding

Behaviors of Nuclear Fuel Cladding During RIA

Recycle of Zirconium from Used Nuclear Fuel Cladding:

Feasibility tests were initiated to determine if the zirconium in commercial used nuclear fuel (UNF) cladding can be recovered in sufficient purity to permit re-use, and if the recovery process can be operated economically. Initial tests are being performed with unirradiated, non-radioactive samples of various types of Zircaloy materials that are used in UNF cladding to develop the recovery pro...

Evaluation of Tool Performance With Nanocrystalline Multilayer Coatings on the Machinability of Superalloy Inconel 718

In this paper, the performance of the cutting tool with nanocrystalline multilayer coatings (TiN+TiAlN) for machining of superalloy Inconel 718 in the dry and wet conditions was studied. The multi layer TiN and TiAlN with nanocrystalline structure was applied by physical vapor deposition technique (arc evaporation) on the WC-Co inserts. The results of the ball on disc wear test and the machinin...

"tin Coatings for Wear Resistance and Gold-like Decorative Coatings"

Titanium Nitride (TiN) coatings have led the way for providing increased wear resistance and extended life of cutting tools, whether carbide inserts or high-speed steel. Where the earliest applications were for high temperature substrate materials (carbides) and chemical vapor deposition (CVD) was the process of choice, later developments in the physical vapor deposition (PVD) technology, espec...

A STUDY OF TiAlN COATINGS PREPARED BY RF CO-SPUTTERING

Using the reactive magnetron rf co-sputtering technique and a Ti target partially covered with a small Al plate, TiAlN coatings were made on c-Si in a reactive atmosphere of nitrogen and argon. Coatings were deposited on substrates at 22°C and at 150°C. The substrate temperature notably affected the thickness, crystalline grain size, and hardness of the coatings. We analyzed the dependence of b...