Multilayer 10B-RPC neutron imaging detector
نویسندگان
چکیده
منابع مشابه
Simulation of a Neutron Detector for Real Time Imaging Applications
Monte Carlo Method is used to simulate a double layer gadolinium-amorphous silicon thermal neutron detector. The detector fabricated in pixel array configuration has various applications including neutron imaging. According to the simulation results, a detector consisting of a gadolinium (Gd) film with thickness of 2-4 ~m, sandwiched properly with two layers of sufficiently thick (-30 ?µm) hydr...
متن کاملA closed-circuit gas system for an RPC-based neutron detector
As a core component of the RB experimental setup [1] in the future FAIR facility, a new neutron detector – NeuLAND – is currently under development at GSI. It is foreseen that NeuLAND will be based on a resistive plate chamber (RPC) concept. RPCs are gas detectors running on a gas mixture of approximately 85% Reclin 134a (1,1,1,2-tetrafluoroethane), 10% SF6 and 5% Isobutane. Reclin 134a and SF6...
متن کامل10B Concentration, Phantom Size and Tumor Location Dependent Dose Enhancement and Neutron Spectra in Boron Neutron Capture Therapy
Background: The amount of average dose enhancement in tumor loaded with 10B may vary due to various factors in boron neutron capture therapy.Objective: This study aims to evaluate dose enhancement in tumor loaded with 10B under influence of various factors and investigate the dependence of this dose enhancement on neutron spectra changes.Material and Methods: In this simulation stud...
متن کاملFirst results on RB2 muon barrel RPC detector for CMS
The first CMS MB2 station, with one RPC and one DT module, has been tested with a muon beam under a high intensity photon flux at the CERN Gamma Irradiation Facility during the Autumn 2001 test. Results on efficiency, rate capability, cluster size and spatial resolution, for the RPC detector, are reported here. Studies with a small percentage of SF6 in the gas mixture, in order to decrease the ...
متن کاملA new Front-End board for RPC detector of CMS
A new Front-End board for the RPC detector of the CMS experiment at LHC is described. It houses two Front-End chips and the Front-End controller, which includes the Synchronization Unit. Its aim is to amplify the delta-like detector signals, ranging from 20 fC to 20 pC, generate fast output pulses and synchronize them with the LHC clock.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Instrumentation
سال: 2020
ISSN: 1748-0221
DOI: 10.1088/1748-0221/15/06/p06007