Multi-Wall Carbon Nanotubes Chemically Grafted and Physically Adsorpted on Reinforcing Carbon Fibres
نویسندگان
چکیده
منابع مشابه
Multiwalled carbon nanotubes with chemically grafted polyetherimides.
Covalent attachment of a non-fluorinated polyetherimide onto the surface of carboxylic acid-functionalized multiwalled carbon nanotubes (MWNTs) has been achieved via grafting reactions. This confirms for the first time that the grafting reaction occurs at the nanotube surface when the carboxylic acid-functionalized MWNTs react with the polyetherimide with amine-terminated groups, through both a...
متن کاملReinforcing Multi-Wall Carbon Nanotubes by Electron Beam Irradiation
To prepare the samples for Transmission Electron Microscopy (TEM) imaging and Atomic Force Microscopy (AFM) measurements, as-grown carbon nanotubes were dispersed in isopropanol and sonicated using HD2200 homogenizer with a power of 20W for 5 minutes. To characterize the nanotubes by HRTEM, a droplet of the suspension was put on a Cu TEM grid with a lacey C film. Alternatively, we deposited a d...
متن کاملLow pressure adsorption of CO2 on multi-wall carbon nanotubes
Volumetric techniques were employed to study the adsorption of CO2 on a purified multi-wall carbon nanotubes (MWNT’s) sample, as a mesoporous material, at isothermal conditions of 288, 293 and 298 K and pressures ranging from 30 to 150 kPa. Langmuir, Freundlich and Sips equations were used to represent the isotherms. Also the parameters of these fitted isotherm models have been determined. The ...
متن کاملChemically functionalized carbon nanotubes.
Since their discovery, carbon nanotubes have attracted the attention of many a scientist around the world. This extraordinary interest stems from their outstanding structural, mechanical, and electronic properties. In fact, apart from being the best and most easily available one-dimensional (1D) model system, carbon nanotubes show strong application potential in electronics, scanning probe micr...
متن کاملElectrochemical Sensor for Determination of Fenitrothion at Multi-wall Carbon Nanotubes Modified Glassy Carbon Electrode
A sensor, based on multi-wall carbon nanotubes modified glassy carbon electrode (MWCNT/GCE), was developed for determination of fenitrothion. Determining the surface area of MWCNT/GCE showed that this surface is three times more active than that of a glassy carbon electrode. The experimental parameters, such as the amount of MWCNTs, pH of the fenitrothion solution, preconcentration potential an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Composites Letters
سال: 2008
ISSN: 2633-366X,2633-366X
DOI: 10.1177/096369350801700304