Multi-Technique Residual Stress Measurements to Quantify Stress Relief of 7085-T7452 Aluminum Die Forgings
نویسندگان
چکیده
منابع مشابه
Residual Stress Measurement of 7050 Aluminum Alloy Open Die Forgings Using the Hole-Drilling Method
Since this project is a result of a class assignment, it has been graded and accepted as fulfillment of the course requirements. Acceptance does not imply technical accuracy or reliability. Any use of the information in this report, including numerical data, is done at the risk of the user. These risks may include catastrophic failure of the device or infringement of patent or copyright laws. T...
متن کاملResidual Stress, Stress Relief, and Inhomogeneity in Aluminum Plate
Through-thickness residual-stress profiles in rolled 7050-T74 aluminum plate were measured before and after stress relief by stretching (-Tx51). Measurement required adapting the crack compliance method to measure both inplane stress components. Unexpected features in the profiles could be explained by through-thickness yield strength variations caused by crystallographic texture.
متن کاملResidual Stress Measurements of Cast Aluminum Engine Blocks Using Diffraction
Residual stresses and strains in as-cast and annealed aluminum engine blocks were mapped in the main web area above the bearing split using diffraction. Automated coordinate-mapping of the surface and bulk strains was accomplished with X-ray and neutron diffraction, respectively. LabVIEW-based software was developed for improved efficiency, flexibility and quality of data analysis. In the hoop ...
متن کاملMEMS Test Structures for Residual Stress Measurements
A set of microstructures for in situ stress measurement is presented, based on a lancet principle having dedicated designs for the amplification of dimensional variation induced by internal stress of the materials. The presented technique has an advantage over the traditional rotating structures and wafer curvature measurements in terms of the simplified readout mechanism. The test structures a...
متن کاملapplication of pulsed eddy current technique to stress and residual stress measurement
stress and residual stress are the main problems in the operating performance of materials. they are the principal causes of material failure and can affect life time of component. however measurement or predictions of them are typically difficult. two common non-destructive methods, x-ray diffraction and ultrasound are not reliable methods for subsurface residual stress measurements and destru...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Performance and Characterization
سال: 2018
ISSN: 2379-1365
DOI: 10.1520/mpc20170105