Multi-stream heat exchanger for oxy-fuel combustion power cycle

Oxy–Fuel Combustion in the Lab–Scale and Large–Scale Fuel–Fired Furnaces for Thermal Power Generations

Oxy - fuel combustion of coal and biomass blends

The ignition temperature, burnout and NO emissions of blends of a semi-anthracite and a high-volatile bituminous coal with 10 and 20 wt.% of olive waste were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under several oxy-fuel atmospheres (21%O2-79%CO2, 30%O2-70% CO2 and 35%O265%CO2) were compared with those attained in air. The results in...

Dynamic Simulation of a Conceptual 600MWe Oxy-fuel Combustion power plant

Oxy-fuel combustion is one of the energy utilization technologies for CO2 capture which is ready for commercial demonstration. System steady-state simulation is an effective tool to help us understand the thermodynamic properties and adjust operation conditions of oxy-fuel combustion system. Moreover, dynamic simulation is essential for understanding the dynamic characteristics of the system, w...

Development of Semiclosed Cycle Gas Turbine for Oxy-Fuel IGCC Power Generation with CO2 Capture

Effects of nitrogen content in fuel on NOX emissions under oxy-fuel coal combustion

Oxy-fuel coal combustion with flue gas re-circulation is known to be one of the most promising methods for reducing CO2 emissions from coal combustion power plants. In the oxy-fuel system, the combustion atmosphere consists of only O2 separated from air and flue gas re-circulated from a stack. Therefore, the flue gas is dominated by CO2 without any nitrogen gas. The most attractive potential as...