Multi-plate interceptive electron beam energy diagnostic—Implementation and validation
نویسندگان
چکیده
منابع مشابه
The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50, 75, 100 and 125 kGy dose ranges to induce a network structure. HDPE crosslinking was studied on the basis of gel content measurements. The fibers w...
متن کاملTwo New Parallel-plate Ionization Chambers for Electron Beam Dosimetry
-Two parallel-plate ionization chambers were projected, constructed and evauated for use in high energy electron beams. They were constructed using the two plastic materials recommended for clinical dosimetry protocols, i.e. acrylic and polystyrene. Both chambers have cylindrical shape with entrance windows in aluminized Mylar and they are open to the air. The acrylic chamber has a 2 mm air gap...
متن کاملNanolithography by high energy electron beam
2014 The theoretical advantages of high energy beam (E0 = 100 keV) in electron lithography in the nanometer range ( 0.1 03BCm) are discussed. Using a Monte Carlo model, the different contributions at energy deposit in the PMMA resist are separated and the influence of each of them on the final resolution is analysed. Revue Phys. Appl. 23 (1988) JUILLET 1988, PAGE 1317 Classification Physics Abs...
متن کاملEnergy Monitoring Device for Electron Beam Facilities
An easy-to-use and robust energy monitoring device has been developed for reliable detection of dayto-day small variations in the electron beam energy, a critical parameter for quality control and quality assurance in industrial radiation processing. It has potential for using on-line, thus providing real-time information. Its working principle is based on the measurement of currents, or charge...
متن کاملChemical cross linking versus high energy electron beam cross linking of HDPE: electrical properties study
Cross linking of high density polyethylene (HDPE) was first performed via high energy10 Mev electron beam (EB) irradiation. HDPE was also cross linked withDicumyle peroxide (DCP).The gel content of samples was determined by solvent extraction.Degree of cross linking was evaluated by hot set apparatus; as well .In order to clarify the effectof nature of cross linking, correlation of electrical p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2018
ISSN: 2158-3226
DOI: 10.1063/1.5063779